{"product_id":"harvey-tool-76462-square-end-mill-1-16-in-4-flute-carbide","title":"Harvey Tool 76462 Square End Mill 1\/16 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 76462 is a solid carbide square end mill designed for precision milling in ferrous and non-ferrous materials. With a 1\/16 inch (0.0625 inch) cutting diameter and four right-hand spiral flutes at a 30-degree helix angle, this tool delivers clean, accurate cuts in tight-tolerance machining applications. The bright, uncoated finish suits general-purpose use across a range of workpiece materials. At 1.5 inches overall length with a 0.186 inch length of cut, it is built for machinists and tool-and-die professionals who need consistent performance in a small-diameter end mill.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for CNC milling operations requiring extended reach in close-quarter or deep-pocket work. The 1\/2 inch reach length and long-length configuration allow access to features that standard-length tools cannot reach. It is centercutting, enabling plunge entry, and its right-hand cutting direction is compatible with standard CNC spindle rotation. Typical applications include die work, prototype machining, and precision part production in job shops and production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in precision milling\u003c\/li\u003e\n\u003cli\u003e4 right-hand spiral flutes with 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eLong-length configuration with 1\/2 inch reach for extended-reach milling applications\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for general-purpose use across multiple materials\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 1\/8 inch shank diameter for standard collet compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose small-diameter end mill compatible with CNC machining centers and manual mills equipped with a standard 1\/8 inch collet or end mill holder.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for tool holding and runout specifications. Ensure the machine spindle is fully stopped and locked before inserting or removing the tool from the collet. Verify collet size matches the 1\/8 inch shank diameter before tightening. Secure the tool to the manufacturer-specified pull-out force to prevent slippage during cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/16 inch (0.0625 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.186 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 1\/2 inch (0.5 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 76462\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51729193500978,"sku":"76462","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2930498108ac144d5e55e8929bf1797f.jpg?v=1788701758","url":"https:\/\/voomisupply.com\/products\/harvey-tool-76462-square-end-mill-1-16-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}