{"product_id":"harvey-tool-76450-square-end-mill-0-05-in-4-flute-carbide","title":"Harvey Tool 76450 Square End Mill 0.05 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 76450 is a solid carbide square end mill designed for precision milling operations requiring tight tolerances and a sharp corner geometry. With a 0.05-inch cutting diameter, a 0.15-inch length of cut, and four flutes arranged in a right-hand spiral at a 30-degree helix angle, this end mill is built for fine detail work in ferrous and non-ferrous materials. The extended reach configuration and 0.5-inch reach length make it suited for accessing recessed features and pockets where standard-reach tooling cannot reach. It is installed and operated by machinists and tooling professionals in CNC milling environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in vertical machining centers and CNC mills where small-diameter, high-precision cutting is required. The bright uncoated finish makes it a practical choice for applications in aluminum, brass, copper, and other non-ferrous materials, as well as some plastics. The centercutting design allows plunge entry directly into the workpiece. With a 1\/8-inch shank diameter and 1.5-inch overall length, it fits standard collet systems used in production and prototype machining environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.05-inch cutting diameter for fine detail and micro-feature milling\u003c\/li\u003e\n\u003cli\u003eFour flutes with right-hand cutting and right-hand flute direction for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle balances cutting forces and surface finish\u003c\/li\u003e\n\u003cli\u003eExtended reach design with 0.5-inch reach length for deep pocket access\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry\u003c\/li\u003e\n\u003cli\u003eBright uncoated solid carbide construction for dimensional stability and wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC milling machines and machining centers that accept a 1\/8-inch shank collet. Compatible with applications requiring a length-of-cut range of 0.1 to 0.2 inches.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis end mill is installed by qualified machinists using a collet or end mill holder rated for the 1\/8-inch shank diameter. Ensure the collet is properly torqued and the shank is fully seated before operation. Verify spindle speed and feed rate parameters match the material being cut before engaging the tool. Inspect the cutting edges for chipping or wear before each use, as small-diameter carbide tools are susceptible to breakage if run out-of-spec.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.05 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.1 to 0.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 76450\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51744777240882,"sku":"76450","price":74.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/42b42a0cc314cf66be626326df4cc839_b16aebf8-cb4b-4f58-92a3-6595cb0fe69d.jpg?v=1788860391","url":"https:\/\/voomisupply.com\/products\/harvey-tool-76450-square-end-mill-0-05-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}