{"product_id":"harvey-tool-76293-square-end-mill-3-32-in-2-flute-carbide","title":"Harvey Tool 76293 Square End Mill 3\/32 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 76293 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 3\/32-inch (0.093 inch) mill diameter and a 0.279-inch length of cut, this two-flute end mill delivers clean, accurate square-bottom profiles in a compact form factor. The 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. A bright, uncoated finish makes it well suited for general-purpose milling where coating is not required. Single-end construction provides a straightforward tool change for CNC machining centers and manual mills alike.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in precision machining environments where small-diameter tooling is required. The 1\/8-inch shank diameter fits standard collets and tool holders found on CNC machining centers, CNC routers, and manual knee mills. The extended-reach geometry, with a 5\/8-inch reach length and 1.5-inch overall length, allows access to features in deeper pockets or stepped workpiece profiles. Right-hand cutting and right-hand flute direction are standard for conventional CNC setups. Machinists, tool-and-die makers, and precision job shop operators are the primary users of this tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/32-inch diameter for small-feature and fine-detail milling\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eTwo flutes with right-hand cut and right-hand helix for efficient chip flow\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth cutting and chip evacuation\u003c\/li\u003e\n\u003cli\u003eExtended-reach design with 5\/8-inch reach length for deeper feature access\u003c\/li\u003e\n\u003cli\u003eCentercutting capability allows plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for general-purpose milling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style small-diameter square end mill for use with standard 1\/8-inch collets and tool holders on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with end mill setup and CNC or manual milling machine operation. Ensure the machine spindle is fully stopped and power is locked out before changing tooling. Seat the 1\/8-inch shank fully and evenly in a clean, undamaged collet or end mill holder and tighten to the tool holder manufacturer's specified torque range. Verify runout with a dial indicator before initiating a cutting program, as small-diameter carbide tooling is sensitive to excessive runout and can fracture under improper conditions.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/32 inch (0.093 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.279 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 5\/8 inch (0.625 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End, Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 76293\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51732145045810,"sku":"76293","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d8c7e76ad1aee60725ab7ddbb4ccfa04_f018cf45-2046-4197-afae-fc4ef8d2f6e9.jpg?v=1788739710","url":"https:\/\/voomisupply.com\/products\/harvey-tool-76293-square-end-mill-3-32-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}