{"product_id":"harvey-tool-73008-square-end-mill-0-008-in-4-flute-carbide","title":"Harvey Tool 73008 Square End Mill 0.008 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 73008 is a solid carbide square end mill designed for precision milling in tight-tolerance machining applications. With a cutting diameter of 0.0080 inches (0.2 mm) and a length of cut of 0.024 inches, this tool is built for micro-scale work where dimensional accuracy is critical. The 4-flute geometry and 30-degree helix angle promote smooth chip evacuation and stable cutting action at small diameters. The 0.125-inch shank fits standard 1\/8-inch collets and tool holders. This end mill is installed and operated by machinists, CNC programmers, and tooling technicians working in precision manufacturing environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for micro-milling operations in materials that demand sharp, rigid tooling. The bright uncoated finish and solid carbide construction make it appropriate for non-ferrous metals, plastics, composites, and similar materials where a coated tool is not required. The 1.5-inch overall length provides adequate clearance for most standard setups. Its centercutting capability allows direct plunge entry without a pre-drilled pilot hole, adding flexibility in programming and fixturing strategies.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0080-inch (0.2 mm) cutting diameter for micro-milling precision work\u003c\/li\u003e\n\u003cli\u003e4-flute design with 30-degree helix angle for improved chip flow and surface finish\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance at small diameters\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC spindle operation\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for non-ferrous and non-abrasive material applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills equipped with a 1\/8-inch collet or compatible tool holder accepting a 0.125-inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool should be installed by a qualified machinist or CNC technician. Ensure the spindle is fully powered down and locked before changing tooling. Use a properly sized collet or tool holder matched to the 0.125-inch shank to prevent runout, which is especially critical at this diameter. Avoid over-tightening the collet nut, as distortion at small shank sizes can increase runout and reduce tool life.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0080 inches (0.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.024 inches (0.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 73008\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51743260148018,"sku":"73008","price":68.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c96247132d19a5254664b32cd20791c_8723f669-7f25-4ff1-b958-a444cd9ebaff.jpg?v=1788844689","url":"https:\/\/voomisupply.com\/products\/harvey-tool-73008-square-end-mill-0-008-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}