{"product_id":"harvey-tool-72805-c3-corner-radius-end-mill-3-8-in-4-flute","title":"Harvey Tool 72805-C3 Corner Radius End Mill 3\/8 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 72805-C3 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking applications. It features a 3\/8 inch cutting diameter with a 0.0050 inch corner radius, four spiral flutes, and a right-hand cutting direction with right-hand flute orientation. The tool carries an AlTiN (aluminum titanium nitride) PVD coating, which improves heat resistance and extends tool life in high-temperature cutting environments. At 2.5 inches overall length with a 1 inch length of cut, this is a stub-standard geometry suited to rigidity-critical setups where deflection control matters.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for roughing and finishing operations across a broad range of primary workpiece materials including steel, stainless steel, cast iron, non-ferrous metals, and composites. The centercutting design allows plunge entry, and the straight cylindrical shank fits standard toolholders. It belongs to the Harvey Tool Miniature End Mills - Corner Radius - Stub and Standard series, making it a practical choice for machinists running tight-tolerance features or small-diameter contour work in production or prototype environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0050 inch corner radius breaks sharp edges and reduces stress concentration at part corners\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating provides high-temperature wear resistance for ferrous and hard materials\u003c\/li\u003e\n  \u003cli\u003eFour-flute spiral geometry supports both roughing and finishing in a single tool\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers rigidity and dimensional consistency in precision work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-bore toolholders. Part of the Harvey Tool Miniature End Mills - Corner Radius - Stub and Standard series. Rated for steel, stainless steel, cast iron, non-ferrous metals, and composite workpiece materials (ISO material codes P, M, K, N, O).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician using a compatible toolholder sized for a 3\/8 inch straight cylindrical shank. Ensure the toolholder bore and collet are clean and free of chips before seating the tool. Confirm runout is within acceptable limits before cutting, as corner radius tools are sensitive to deflection at small radii. Always power down and lock out the spindle before changing tooling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0050 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.0010 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 \/ -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0100 \/ -0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Composite\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72805-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51746685518130,"sku":"72805-C3","price":109.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe9dfb4bd777927aee3a1c807088ea9b_6410d8f6-a6bb-444d-be01-b4a6b41532f8.jpg?v=1788872691","url":"https:\/\/voomisupply.com\/products\/harvey-tool-72805-c3-corner-radius-end-mill-3-8-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}