{"product_id":"harvey-tool-72156-square-end-mill-0-1562-in-2-flute-carbide","title":"Harvey Tool 72156 Square End Mill 0.1562 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 72156 is a solid carbide square end mill designed for precise milling operations in metalworking and machining environments. With a 0.1562-inch (5\/32-inch) cutting diameter and a 0.562-inch length of cut, this end mill is built for controlled material removal in tight geometries. The 2-flute configuration and 30-degree helix angle promote efficient chip evacuation, making it well-suited for slotting, profiling, and plunging applications. The bright, uncoated finish is standard for general-purpose carbide tooling. It is a single-end, right-hand cut, right-hand flute tool with a 0.1875-inch (3\/16-inch) shank diameter and a 2-inch overall length. This tool is installed and operated by CNC machinists and tool-and-die professionals.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for use in CNC machining centers and manual mills requiring small-diameter, precise cuts. The 5\/32-inch diameter makes it a common choice for detail work, finishing passes, and narrow slot cutting in ferrous and non-ferrous materials. The solid carbide construction provides rigidity and wear resistance compared to high-speed steel alternatives, particularly in harder workpiece materials. The center-cutting capability allows direct plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute orientation for standard CNC spindle use\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for general-purpose machining applications\u003c\/li\u003e\n  \u003cli\u003e2-flute configuration optimized for slotting and profiling in tighter geometries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for CNC machining centers and manual milling machines accepting a 3\/16-inch round shank end mill.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the spindle fully powered down and at a complete stop. Use an appropriate collet or end mill holder sized for a 0.1875-inch shank and ensure the tool is seated and torqued according to the holder manufacturer specifications. Small-diameter carbide end mills are brittle and susceptible to breakage from excessive runout or improper fixturing — verify collet condition and concentricity before operation. CNC machinists should confirm feed and speed parameters for the specific workpiece material before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1562 inches (5\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.562 inches (9\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72156\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51747712434482,"sku":"72156","price":35.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c96247132d19a5254664b32cd20791c_7f615cb6-62a0-43e8-ae52-9e5218775bd3.jpg?v=1788884533","url":"https:\/\/voomisupply.com\/products\/harvey-tool-72156-square-end-mill-0-1562-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}