{"product_id":"harvey-tool-62878-c6-square-end-mill-5-64-in-5-flute-carbide","title":"Harvey Tool 62878-C6 Square End Mill 5\/64 in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 62878-C6 is a solid carbide square end mill designed for precision milling in demanding metalworking applications. With a 5\/64 inch (0.0780 inch) cutting diameter and a 5\/8 inch length of cut, this tool delivers tight tolerances in small-bore and detail work. Five flutes and a 44-degree variable helix geometry improve chip evacuation and reduce chatter, making it well suited for harder materials and finishing passes. An AlTiN coating adds heat resistance and surface hardness, extending tool life in ferrous and high-temp alloy cuts. Licensed machinists and CNC operators are the primary users of this end mill.\u003c\/p\u003e\u003cp\u003eThis end mill fits applications requiring a compact cutting diameter with a full 2-1\/2 inch overall length for clearance in deeper setups. The 1\/8 inch shank diameter suits standard collet and tool holder configurations used in vertical machining centers and CNC mills. Its right-hand cut and right-hand flute direction are consistent with conventional climb and conventional milling operations. The non-center-cutting design means it is intended for side milling, profiling, slotting, and peripheral cuts rather than plunge entry.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5\/64 inch (0.0780 inch) cutting diameter for fine detail and small-feature work\u003c\/li\u003e\n\u003cli\u003e5 flutes with 44-degree variable helix for reduced chatter and improved chip flow\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance in ferrous and high-temp alloy machining\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003e1\/8 inch shank diameter compatible with standard collet systems\u003c\/li\u003e\n\u003cli\u003eNon-center-cutting, right-hand geometry for side milling and profiling operations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC vertical machining centers and manual mills equipped with 1\/8 inch collets or tool holders; suitable for profiling, slotting, and peripheral milling in ferrous metals and high-temperature alloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the machine in a powered-down, locked-out state per OSHA lockout\/tagout procedures. Ensure the collet and tool holder are clean and free of debris before seating the shank. Verify runout with a dial indicator before initiating a cutting program. Do not use this non-center-cutting end mill for plunge entry into a solid workpiece.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/64 inch (0.0780 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.625 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches (2.5 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: 44 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 62878-C6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51753094447410,"sku":"62878-C6","price":92.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eca9b992a998e987a3a2f90c38b70429_14546641-4940-44f0-a3db-c0183e42e820.jpg?v=1788932749","url":"https:\/\/voomisupply.com\/products\/harvey-tool-62878-c6-square-end-mill-5-64-in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}