{"product_id":"harvey-tool-54647-c3-ball-end-mill-0-0469-in-2-flute-altin","title":"Harvey Tool 54647-C3 Ball End Mill 0.0469 in 2 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 54647-C3 is a single-end ball end mill designed for high-precision milling of contoured surfaces, slots, and 3D profiling operations. Ground from solid carbide, this tool delivers the rigidity and edge retention needed for hardened steels, stainless alloys, and non-ferrous materials. The AlTiN coating reduces heat buildup at the cutting zone, extending tool life in dry and semi-dry machining environments. With a 0.0469-inch diameter and 0.04-inch length of cut, this tool is suited for fine-detail work and micro-machining applications where dimensional accuracy is critical. It is installed and operated by machinists and CNC programmers on vertical machining centers and CNC mills.\u003c\/p\u003e\u003cp\u003eThis end mill is used in shops performing precision part work, die and mold finishing, medical component machining, and aerospace detail milling. The 3\/64-inch diameter makes it appropriate for narrow slot profiles and tight-radius contours where larger tooling cannot reach. A 1\/8-inch shank diameter allows direct chucking into standard collet systems. The 0.25-inch neck length provides clearance for shallow-pocket operations without tool deflection becoming a primary concern at these depths.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance in demanding materials\u003c\/li\u003e\n\u003cli\u003eAlTiN coating extends tool life by reducing thermal load at the cutting edge\u003c\/li\u003e\n\u003cli\u003e0.0469-inch (3\/64-inch) ball diameter enables fine-detail and micro-milling work\u003c\/li\u003e\n\u003cli\u003e2-flute geometry supports chip evacuation in confined cutting zones\u003c\/li\u003e\n\u003cli\u003eRight-hand flute direction and right-hand cutting direction for standard CNC spindle operation\u003c\/li\u003e\n\u003cli\u003e270-degree wrap angle optimizes contact and surface finish on curved profiles\u003c\/li\u003e\n\u003cli\u003eSingle-end configuration with 1\/8-inch shank for direct collet mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC vertical machining centers and milling machines equipped with 1\/8-inch collet systems; suitable for machining hardened steels, stainless steel, titanium, and non-ferrous alloys where AlTiN coating performance is appropriate.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is installed by qualified machinists or CNC setup personnel. Power down and lock out the spindle before inserting or removing the tool from the collet. Ensure the collet and tool holder are clean and free of chips before seating the shank. Do not exceed the manufacturer-recommended runout tolerance for the tool diameter, as deflection and breakage risk increase significantly at sub-1\/8-inch diameters.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.0469 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fraction)\u003c\/strong\u003e: 3\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.04 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.029 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrap Angle\u003c\/strong\u003e: 270 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54647-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51728674980146,"sku":"54647-C3","price":136.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/29dc6da053002fa747a0ecadbfc0443f_cdc5da4f-ca88-40ee-a024-86d9b88008b8.jpg?v=1788694785","url":"https:\/\/voomisupply.com\/products\/harvey-tool-54647-c3-ball-end-mill-0-0469-in-2-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}