{"product_id":"harvey-tool-53710-c6-corner-radius-end-mill-4-flute-altin","title":"Harvey Tool 53710-C6 Corner Radius End Mill 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 53710-C6 is a solid carbide corner radius end mill engineered for high-temperature alloy machining and general precision milling in steel, stainless steel, cast iron, and hard materials. It carries a 0.0150 inch corner radius, a 5\/32 inch (0.1562 inch) mill diameter, and a 3\/4 inch length of cut. The AlTiN PVD coating provides thermal resistance and oxidation protection during aggressive cuts. A variable helix geometry reduces harmonic vibration, improving surface finish and tool life in difficult materials. Machinists and toolroom operators working with tight tolerances will find the 4-flute, right-hand spiral configuration effective for both roughing and finishing passes in a single setup.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC milling operations in job shops, aerospace, medical device, and precision manufacturing environments where high-temp alloys, hardened steels, and stainless grades are common workpiece materials. The centercutting design allows plunge entry, adding flexibility to slotting and pocket-milling operations. With a 3\/16 inch straight-cylindrical shank, it seats in standard high-precision toolholders. The long-length classification and 3 inch overall length extend reach for deeper features without requiring a custom extension. Installation is straightforward in any collet or hydraulic chuck rated for the 3\/16 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable helix geometry reduces chatter and vibration in high-temp alloy cuts\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating provides oxidation and heat resistance at elevated cutting temperatures\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge entry for slot and pocket milling\u003c\/li\u003e\n  \u003cli\u003e4-flute, right-hand spiral supports both roughing and finishing material removal\u003c\/li\u003e\n  \u003cli\u003e0.0150 inch corner radius with a tight tolerance of plus or minus 0.0010 inch protects corners and reduces stress concentration\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction maintains rigidity and edge integrity in hard and abrasive workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with high-precision toolholders in CNC milling applications. Primary workpiece materials include steel, stainless steel, cast iron, and hard alloys. Part of the Harvey Tool Variable Helix End Mills for High Temp Alloys - Corner Radius and Material Specific End Mills series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or toolroom technicians. Seat the 3\/16 inch straight-cylindrical shank fully into a high-precision collet or hydraulic chuck before torquing the toolholder to the spindle manufacturer's specification. Ensure the machine spindle is at a complete stop and the CNC controller is in an E-stop or locked-out state before changing tooling. Do not exceed the toolholder's rated runout tolerance, as excessive runout will accelerate wear on a small-diameter end mill of this type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/32 inch (0.1562 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0150 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 34 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: plus 0.0010 to minus 0.0010 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 \/ minus 0.0020 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: plus 0.0100 \/ minus 0.0000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Hard Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.18 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 53710-C6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51727192883506,"sku":"53710-C6","price":85.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6a64bbe92bc48e9d4bc473f6d0d752b1_720e9186-479d-4c84-8d48-5082d0f09aea.jpg?v=1788674551","url":"https:\/\/voomisupply.com\/products\/harvey-tool-53710-c6-corner-radius-end-mill-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}