{"product_id":"harvey-tool-51532-square-end-mill-0-5-in-1-flute-carbide","title":"Harvey Tool 51532 Square End Mill 0.5 in 1 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 51532 is a single-flute, solid carbide square end mill designed for precision milling applications where chip clearance and surface finish are critical. The cutter measures 0.5 inches in diameter with a 1.5-inch length of cut and a 3-inch overall length, all on a 0.5-inch shank. The single upcut flute geometry promotes aggressive chip evacuation, reducing heat buildup in the cut zone. With a 22-degree helix angle and right-hand cut direction, this end mill is suited for applications where clean slot milling, profiling, and plunge cuts are required in challenging materials. It is supplied uncoated (bright finish) and is ready for use as received or with operator-selected coatings.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for use in CNC machining centers and manual mills where a single-flute tool is preferred for its superior chip-clearing capability, particularly in softer metals, plastics, composites, and non-ferrous materials. The solid carbide construction provides rigidity and wear resistance compared to HSS tooling. Machinists and CNC operators in job shops, aerospace shops, and general manufacturing facilities are the typical end users. The 3-inch overall length allows adequate reach for deeper pockets while maintaining tool rigidity on standard toolholding systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-flute upcut geometry for maximum chip evacuation and reduced recutting\u003c\/li\u003e\n  \u003cli\u003e22-degree helix angle balances cutting forces and surface finish quality\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life versus HSS\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration — standard for conventional CNC spindle rotation\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish — compatible with additional coatings applied by the operator or a coating service\u003c\/li\u003e\n  \u003cli\u003e0.5-inch shank diameter fits standard ER collets, end mill holders, and shrink-fit toolholding systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual mills using 0.5-inch (1\/2-inch) collets or end mill holders. Confirm spindle speed, feed rate, and depth-of-cut parameters against your machine and workpiece material specifications before use.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the machine spindle fully stopped and the machine in an e-stop or lockout\/tagout state per applicable shop safety procedures. Ensure the shank is clean and free of chips or coolant residue before seating in the toolholder to maintain runout accuracy. Torque the toolholder to the toolholder manufacturer's specification — do not use shop-estimated torque. Verify tool projection and length of cut clearance before initiating the first cut cycle.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches (1-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 22 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 51532\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51750389874994,"sku":"51532","price":213.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d199482b9b47746c1eb0fe2a32d2eed6_b5ce2f7c-a7aa-4aaa-8ac0-f6c82b2447f3.jpg?v=1788915215","url":"https:\/\/voomisupply.com\/products\/harvey-tool-51532-square-end-mill-0-5-in-1-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}