{"product_id":"harvey-tool-47615-c3-chamfer-mill-1-4-in-2-flute-carbide-altin","title":"Harvey Tool 47615-C3 Chamfer Mill 1\/4 in 2 Flute Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 47615-C3 is a solid carbide chamfer mill designed for precision chamfering and deburring operations on a wide range of workpiece materials. With a 1\/4 inch cutter head diameter, 2-flute single-end geometry, and a right-hand cutting direction, this tool delivers clean, consistent chamfer profiles in high-cycle production and job-shop environments alike. The AlTiN coating provides elevated hardness and oxidation resistance, extending tool life in ferrous and hardened materials. Overall length is 2-1\/2 inches with a 1\/4 inch shank diameter. Licensed machinists and CNC operators are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis chamfer mill is suited for use in CNC machining centers and manual mills where edge preparation, chamfering, countersinking, and deburring are required. The 30 to 150 degree included angle range makes it appropriate for a broad set of chamfer geometries on steel, stainless, aluminum, and similar materials. It is packaged individually and well suited for both production runs and prototype work where edge quality and repeatability matter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating increases surface hardness and heat resistance for longer tool life\u003c\/li\u003e\n  \u003cli\u003e2-flute single-end geometry supports clean chip evacuation and smooth edge finishes\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard CNC and manual mill spindle rotation\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch shank diameter fits standard collets and tool holders without adapters\u003c\/li\u003e\n  \u003cli\u003eIncluded angle of 30 to 150 degrees accommodates a wide range of chamfer profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style solid carbide chamfer mill for use in CNC machining centers and manual milling machines equipped with a 1\/4 inch collet or end mill holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe state before loading or removing the tool from the holder. Secure the 1\/4 inch shank fully into the collet or tool holder to the recommended engagement depth before tightening. Verify runout with a dial indicator after installation to confirm proper seating before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Head Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.4480 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 30 to 150 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.6 inches L x 0.51 inches W x 0.51 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 47615-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51736841158962,"sku":"47615-C3","price":84.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ac4e83f33375d7b705661021dd222a70.jpg?v=1788780954","url":"https:\/\/voomisupply.com\/products\/harvey-tool-47615-c3-chamfer-mill-1-4-in-2-flute-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}