{"product_id":"harvey-tool-44562-c3-woodruff-keyseat-cutter-solid-carbide","title":"Harvey Tool 44562-C3 Woodruff Keyseat Cutter Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 44562-C3 is a solid carbide Woodruff keyseat cutter designed for cutting keyseats and slots in a wide range of workpiece materials. It features a 0.25-inch cutting diameter and a 0.062-inch cutting width, with a staggered-tooth configuration across 6 teeth for smoother chip evacuation and reduced cutting forces. The cutter carries an AlTiN coating, which improves heat resistance and extends tool life in demanding applications. The 1\/4-inch shank diameter and 2.5-inch overall length make it compatible with standard collet toolholding systems. Machinists and tool-and-die professionals install this cutter in milling machines and machining centers for precise keyseat operations.\u003c\/p\u003e\n\u003cp\u003eThis cutter is suited for keyseat and slot milling in steel, stainless steel, and cast iron as primary workpiece materials. It is also capable in secondary applications involving non-ferrous metals, superalloys, titanium, and hard materials. The staggered-tooth geometry makes it a practical choice for both roughing and finishing keyseats where surface finish and dimensional accuracy are required. It is appropriate for use in both job shop and production machining environments where carbide tooling is standard.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for elevated heat resistance in ferrous and hard-material applications\u003c\/li\u003e\n  \u003cli\u003eStaggered-tooth configuration with 6 teeth for improved chip flow and reduced chatter\u003c\/li\u003e\n  \u003cli\u003e0.25-inch cut diameter and 0.062-inch cut width for precise keyseat geometry\u003c\/li\u003e\n  \u003cli\u003e0.125-inch neck diameter and 0.375-inch neck length provide clearance in deep-slot operations\u003c\/li\u003e\n  \u003cli\u003e0.010-inch corner radius for controlled edge geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. Fits standard 1\/4-inch collet or toolholder systems. No Weldon flat is present on the shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using a milling machine or CNC machining center with a compatible 1\/4-inch collet or end mill holder. Ensure the spindle is fully stopped and the machine is in a safe state before changing or seating the cutter. Verify runout at the shank before beginning the cut, as excessive runout accelerates edge wear on small-diameter carbide tooling. Follow the tool manufacturer's recommended speeds and feeds for the specific workpiece material and coating type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.062 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Configuration\u003c\/strong\u003e: Staggered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Non-Ferrous Metal, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 44562-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51739813052722,"sku":"44562-C3","price":175.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/96b8acb5bfe11e056643869d580969d8_d2bb5006-f5fc-4685-a0f8-37555bd55459.jpg?v=1788819182","url":"https:\/\/voomisupply.com\/products\/harvey-tool-44562-c3-woodruff-keyseat-cutter-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}