{"product_id":"harvey-tool-39900-c3-spotting-drill-140-deg-solid-carbide","title":"Harvey Tool 39900-C3 Spotting Drill 140 Deg Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 39900-C3 is a solid carbide spotting drill designed to create accurate starter spots for follow-up drilling operations. The 140-degree point angle reduces walking and improves hole location accuracy on flat and angled workpiece surfaces. At 1.5 inches overall length with a 0.100-inch cutting diameter and 0.125-inch straight cylindrical shank, this tool fits standard drill chucks and collet holders common in CNC machining centers and manual mills. The AlTiN coating provides elevated heat resistance and extended tool life in ferrous and high-hardness materials. Two spiral flutes evacuate chips efficiently during the spotting pass.\u003c\/p\u003e\n\u003cp\u003eThis spotting drill is suited for general-purpose metal cutting applications in job shops, production machining, and toolrooms. It is used ahead of twist drills, insert drills, and boring operations to establish precise hole centers and eliminate pilot deviation. The short flute length of 0.300 inches and compact overall length make it appropriate for confined setups and close-tolerance work where rigidity matters. Machinists and CNC operators working with steel, stainless, cast iron, and similar materials will find this a dependable station in a tool carousel or manual setup.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e140-degree point angle reduces drill walk and improves positional accuracy at hole entry\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance over high-cycle use\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating improves heat resistance for cutting ferrous and hard materials\u003c\/li\u003e\n  \u003cli\u003eTwo spiral flutes promote chip evacuation during spotting passes\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard collets and drill chucks without modification\u003c\/li\u003e\n  \u003cli\u003eHarvey Type I point geometry engineered for consistent spot depth and clean seat formation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose spotting drill for use with standard 0.125-inch straight shank collets and drill chucks in CNC machining centers, knee mills, and similar machine tools.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this tool should be performed by a qualified machinist or CNC operator. Secure the shank fully in a collet or drill chuck to the recommended grip depth before running the spindle. Verify spindle speed and feed rate against the tool manufacturer recommendations for the workpiece material and coating before beginning a cut. Inspect the cutting edge and coating condition before each use and replace the tool if chipping or wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.100 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.300 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Harvey Type I\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thickness\u003c\/strong\u003e: 0.006 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Spotting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 39900-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51727764881714,"sku":"39900-C3","price":59.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1d9baac008b2792f440eb9aa7a82f9fd.jpg?v=1788681960","url":"https:\/\/voomisupply.com\/products\/harvey-tool-39900-c3-spotting-drill-140-deg-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}