{"product_id":"harvey-tool-34635-c3-square-end-mill-0-9mm-3-flute-altin","title":"Harvey Tool 34635-C3 Square End Mill 0.9mm 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 34635-C3 is a miniature solid carbide square end mill designed for high-precision milling in tight-tolerance applications. With a 0.9 mm (0.0350 inch) cutting diameter and a 3-flute geometry, this tool is built for fine detail work in hardened and difficult-to-machine materials. An AlTiN coating provides thermal resistance and extended tool life under demanding cutting conditions. The 30-degree helix angle promotes efficient chip evacuation while reducing cutting forces. This end mill is suited for machinists, toolmakers, and precision CNC operators working in aerospace, medical, mold, and die applications.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for single-end use with right-hand cutting and right-hand flute direction. The extended reach design accommodates applications where the cutting zone is recessed or requires clearance from workpiece features. It fits standard 1\/8 inch collet systems and is compatible with CNC machining centers and manual milling setups where sub-millimeter precision is required. The center-cutting capability allows for direct plunge entry into the workpiece material.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.9 mm (0.0350 inch) cutting diameter for fine detail and micro-milling work\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for high heat resistance and improved wear life in hard materials\u003c\/li\u003e\n\u003cli\u003e3-flute design balances chip load capacity with cutting efficiency at small diameters\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow and reduces cutting pressure\u003c\/li\u003e\n\u003cli\u003eExtended reach with 0.281 inch reach length for access to recessed features\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to fit standard 1\/8 inch collet systems on CNC machining centers and precision milling machines capable of running sub-millimeter tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank fully within the collet to the recommended minimum insertion depth before tightening. Verify spindle runout with a test indicator before commencing cuts, as excessive runout will cause rapid tool failure at this diameter. Ensure the machine spindle is fully stopped before tool changes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.9 mm (0.0350 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.053 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.0000 - 0.1000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.281 inches (9\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34635-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51730064146738,"sku":"34635-C3","price":78.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/48693790ec4e97f05d5a09a1389fd32c_ae99b210-317a-4fe4-8e05-405c48b33ca6.jpg?v=1788711078","url":"https:\/\/voomisupply.com\/products\/harvey-tool-34635-c3-square-end-mill-0-9mm-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}