{"product_id":"harvey-tool-33714-square-end-mill-7-32-inch-4-flute-carbide","title":"Harvey Tool 33714 Square End Mill 7\/32 Inch 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 33714 is a solid carbide square end mill designed for precision milling operations in metal, composites, and engineering plastics. With a 7\/32-inch (0.2187-inch) cutting diameter and four flutes, this centercutting tool handles slotting, profiling, and plunge cutting in a single setup. The 30-degree helix angle balances chip evacuation and surface finish across a range of materials. Right-hand cut and right-hand flute geometry follow standard milling conventions, making this a direct fit for most CNC machining centers and manual knee mills. Machinists and toolroom technicians install this style of end mill for close-tolerance work where consistent tool geometry is critical.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits light-to-medium-duty milling in job shops, production machining, and maintenance toolrooms. The 1-3\/4-inch length of cut accommodates wall heights and slot depths common in fixture work and prototype machining. The 1\/4-inch shank diameter fits standard ER collets, end mill holders, and set-screw tool holders commonly found in 3-axis and 4-axis CNC setups. Its uncoated carbide construction makes it well suited for non-ferrous metals, aluminum alloys, plastics, and certain steel applications where a bare carbide edge is preferred for edge sharpness and re-grindability.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in precision milling\u003c\/li\u003e\n  \u003cli\u003eFour-flute design balances material removal rate with chip clearance\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute — standard orientation for conventional and climb milling\u003c\/li\u003e\n  \u003cli\u003eUncoated finish preserves a sharp edge and simplifies re-grinding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, manual mills, and multi-axis machines equipped with 1\/4-inch collets or end mill holders. Compatible with standard ER16, ER20, and similarly sized collet systems that accept a 0.2500-inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is powered down or in an e-stop state before changing tooling. Seat the shank to the full recommended engagement depth in the tool holder to minimize runout and prevent pull-out under load. Verify tool runout with a dial indicator before production cutting, especially for close-tolerance applications.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/32 inch (0.2187 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-3\/4 inches (1.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 4.25 inches x 0.51 inches x 0.51 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 33714\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51727426093362,"sku":"33714","price":76.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/32f03fcaa1ec94a4e176dd94797e81e6_b8e2fd18-869b-472f-acd5-0cff66344a5e.jpg?v=1788677793","url":"https:\/\/voomisupply.com\/products\/harvey-tool-33714-square-end-mill-7-32-inch-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}