{"product_id":"harvey-tool-33693-c3-square-end-mill-3-32-in-3-flute-altin","title":"Harvey Tool 33693-C3 Square End Mill 3\/32 in 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 33693-C3 is a solid carbide square end mill designed for precision milling in demanding machining environments. With a 3\/32 inch (0.093 inch) cutting diameter, 3\/4 inch length of cut, and three right-hand spiral flutes at a 30-degree helix angle, this single-end tool delivers clean, accurate cuts in ferrous and non-ferrous materials. The AlTiN (aluminum titanium nitride) coating increases surface hardness and heat resistance, extending tool life in high-temperature cutting conditions. This end mill is sized for fine-detail work and is suited for CNC machining centers and manual mills running at appropriate speeds and feeds for carbide tooling.\u003c\/p\u003e\n\u003cp\u003eThis end mill is used in precision machining applications where a small-diameter, center-cutting tool is required. The long-length classification and 3\/4 inch length of cut allow access to deeper features than standard-length tools of the same diameter. Typical applications include slot milling, profiling, and pocket milling in tool steels, stainless steels, hardened materials, aluminum alloys, and composites. The right-hand cutting direction is standard for conventional CNC mill setups. Machinists and tool-and-die professionals working with tight tolerances and small-diameter features will find this tool appropriately specified for that work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for enhanced heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e3\/32 inch (0.093 inch) cutting diameter for fine-detail and small-feature milling\u003c\/li\u003e\n  \u003cli\u003e3\/4 inch length of cut with long-length classification for deeper feature access\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with right-hand flute and cutting direction\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard selection for CNC machining centers and manual mills accepting a 1\/8 inch shank diameter. Compatible with collets, ER-style chucks, and end mill holders sized for 1\/8 inch shank tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following safe tooling change procedures. Ensure the spindle is fully stopped and machine power is off before changing tooling. Seat the 1\/8 inch shank fully into the collet or tool holder and torque the retention mechanism to the tool holder manufacturer's specification. Verify runout with a dial indicator before beginning cuts, especially given the small diameter of this tool, which is sensitive to deflection at higher depths of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/32 inch (0.093 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.75 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches (2.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 33693-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51734981411122,"sku":"33693-C3","price":69.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5d70c12256c804cf5e3a34b4b274a50d_3726db1b-5246-46e1-9eb5-cc43cacd7d25.jpg?v=1788768857","url":"https:\/\/voomisupply.com\/products\/harvey-tool-33693-c3-square-end-mill-3-32-in-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}