{"product_id":"harvey-tool-33302-c3-square-end-mill-7-64-in-3-flute-carbide","title":"Harvey Tool 33302-C3 Square End Mill 7\/64 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 33302-C3 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 7\/64 inch (0.109 inch) cutting diameter and a 0.164 inch length of cut, this tool is built for tight-tolerance work in small-diameter applications. The three-flute geometry balances chip evacuation with cutting efficiency, and the AlTiN coating improves heat resistance and tool life in ferrous and hardened materials. At 2.5 inches overall length with a 1\/8 inch shank diameter, it is sized for use in standard collet chucks and milling machines.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for slot milling, profiling, and finishing passes in steel, stainless steel, cast iron, and similar hard materials where heat generation and tool wear are primary concerns. The extended reach design, with a 0.57 inch reach length, allows access to recessed features and stepped geometry. It is centercutting, enabling plunge entry, and operates with right-hand cutting and right-hand flute direction. Machinists in job shops, tool rooms, and production environments working with small-bore or fine-detail components will find this tool appropriate for their applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for extended tool life and performance at elevated cutting temperatures\u003c\/li\u003e\n  \u003cli\u003e3-flute design balances chip clearance and surface finish quality\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without pre-drilled entry\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 0.57 inch reach length for access to recessed features\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and reduced cutting forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for standard 1\/8 inch shank collet holders and milling chucks used in CNC machining centers and manual milling machines requiring a 7\/64 inch diameter square end mill.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety protocols. Ensure the machine spindle is fully stopped and locked out before changing tooling. Seat the 1\/8 inch shank fully into the collet or tool holder and torque the collet nut to the tool holder specification. Verify runout with a dial indicator before commencing cutting operations, as excessive runout will accelerate wear on a small-diameter tool of this type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/64 inch (0.109 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.164 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.57 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 33302-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51753122955570,"sku":"33302-C3","price":77.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/68d533e7059b5900bd9750ddf0aa016e_59e6f7e1-de4e-42e7-9b0b-d651e72169d8.jpg?v=1788933047","url":"https:\/\/voomisupply.com\/products\/harvey-tool-33302-c3-square-end-mill-7-64-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}