{"product_id":"harvey-tool-33260-c3-square-end-mill-0-06in-3-flute-altin","title":"Harvey Tool 33260-C3 Square End Mill 0.06in 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 33260-C3 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 0.06 inch cutting diameter and a 3\/32 inch length of cut, this tool is built for tight-tolerance finishing and profiling in confined areas. The three-flute geometry paired with a 30-degree helix angle improves chip evacuation and surface finish quality. An AlTiN coating adds heat and wear resistance, making this end mill effective in hard and abrasive materials. The extended reach design and 5\/16 inch reach length provide access to deep pockets and stepped features that shorter tools cannot reach.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers and manual mills in job shop, production, and toolroom environments. It is a single-end, right-hand cutting and right-hand flute tool with centercutting capability, allowing plunge entry into workpieces. The 1\/8 inch shank diameter fits standard collets and end mill holders common on benchtop and full-size vertical machining centers. Typical materials include hardened steels, stainless steel, titanium, and other difficult-to-machine alloys where AlTiN coating performance is most effective.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.06 inch cutting diameter for fine detail and small-feature milling\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for improved performance in hard and high-temperature materials\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and chip flow\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 5\/16 inch reach length for deep pocket access\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/8 inch collets and end mill holders on CNC machining centers and manual vertical mills. Compatible with applications requiring a length of cut up to 0.10 inch.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine in a safe, locked-out state. Ensure the collet and holder are clean and free of debris before seating the shank. Micro-diameter end mills require careful runout verification after installation to avoid breakage during initial cuts. Follow the machine tool manufacturer guidelines for speed, feed, and depth of cut when working with small-diameter carbide tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.09 inches (3\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.312 inches (5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 33260-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51754880172338,"sku":"33260-C3","price":77.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/68d533e7059b5900bd9750ddf0aa016e_6c741ff7-e5f7-4a44-953b-a23e221b267c.jpg?v=1788949486","url":"https:\/\/voomisupply.com\/products\/harvey-tool-33260-c3-square-end-mill-0-06in-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}