{"product_id":"harvey-tool-25110-engraving-cutter-40-deg-1-8-in-carbide","title":"Harvey Tool 25110 Engraving Cutter 40 Deg 1\/8 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 25110 is a solid carbide engraving cutter designed for precise, pointed-tip engraving work in both ferrous and non-ferrous metal applications. Built with a 40-degree included angle and a single right-hand flute, this cutter delivers clean, controlled line definition in demanding shop environments. The uncoated bright finish is suited for applications where coating buildup or adhesion could compromise fine detail. With a 1\/8 inch cutter diameter and 0.171 inch length of cut, it is engineered for shallow, high-definition engraving passes. Licensed machinists and CNC operators are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis engraving cutter is used in CNC machining centers and manual engraving setups where fine detail work is required on ferrous metals such as steel and iron, as well as non-ferrous metals including aluminum, brass, and copper. Its 1-1\/2 inch overall length and 1\/8 inch shank diameter make it compatible with standard collet systems used in vertical machining centers and engraving machines. It is well suited for part marking, serial number engraving, decorative line work, and tool identification applications in production or job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e40-degree included angle for sharp, defined engraving lines\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in metal cutting\u003c\/li\u003e\n  \u003cli\u003eSingle flute design promotes chip clearance in shallow engraving passes\u003c\/li\u003e\n  \u003cli\u003eUncoated bright finish compatible with ferrous and non-ferrous metal applications\u003c\/li\u003e\n  \u003cli\u003e1\/8 inch shank fits standard collet toolholding systems\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for use with standard CNC spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on ferrous metals and non-ferrous metals. Fits standard 1\/8 inch collets and toolholders used in CNC engraving machines and vertical machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine in a safe, de-energized state. Ensure the 1\/8 inch shank is fully seated and properly torqued in the collet per the toolholder manufacturer guidelines before initiating a cut. Inspect the cutting tip for chips or damage before each use, as carbide is brittle and susceptible to edge fracture if mishandled. Follow applicable machine guarding and PPE requirements per shop safety standards.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Shape\u003c\/strong\u003e: Pointed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.171 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous Metal, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241614\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 25110\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51731935625522,"sku":"25110","price":36.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dad2c4328c44ed8c7eede443975c3a65_510f7fb3-19a1-402a-b4e8-7aac1fb97487.jpg?v=1788736883","url":"https:\/\/voomisupply.com\/products\/harvey-tool-25110-engraving-cutter-40-deg-1-8-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}