{"product_id":"harvey-tool-12750-square-end-mill-0-05-in-3-flute-carbide","title":"Harvey Tool 12750 Square End Mill 0.05 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 12750 is a solid carbide square end mill designed for precision milling operations where tight tolerances and clean edge geometry are required. With a 0.0500-inch cutting diameter and three spiral flutes cut at a 30-degree helix angle, this tool delivers efficient chip evacuation and smooth surface finishes in ferrous and non-ferrous materials. The 0.3-inch length of cut and 2.5-inch overall length place it in the long-series category, giving machinists access to features with moderate depth requirements. It is center-cutting, allowing plunge and ramp entry without a pre-drilled pilot. Machining professionals in CNC shop environments are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for fine-detail work in industries such as aerospace, medical device manufacturing, mold making, and precision tooling. The 0.0500-inch diameter is appropriate for slot milling, profiling, and contouring in small-scale features where a larger tool cannot reach. The long-series geometry provides additional reach for stepped or recessed part features. The 0.125-inch shank diameter is compatible with standard collet and toolholder systems commonly found on CNC machining centers and high-speed spindles.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0500-inch cutting diameter for fine-detail and small-feature milling\u003c\/li\u003e\n\u003cli\u003e3 spiral flutes at 30-degree helix angle for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge and ramp entry\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eLong-series length of cut at 0.3 inches provides extended reach capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and high-speed spindles accepting a 0.125-inch shank diameter via standard collet or toolholder systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool should be installed and adjusted only by qualified machinists familiar with CNC tooling practices. Ensure the spindle is fully stopped and the machine is in a safe state before inserting or removing the end mill from the collet or toolholder. Verify runout and tool projection before initiating a cut, as small-diameter carbide tools are sensitive to misalignment and excessive overhang. Follow the tool manufacturer and machine builder recommendations for speeds, feeds, and depth of cut parameters for this diameter range.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.3 inches (19\/64 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches (2-1\/2 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12750\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51732768850226,"sku":"12750","price":59.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8842c115dffb99c3f73becd1f95e76e1_ccab6322-b14a-4770-a38e-6f8686266c5e.jpg?v=1788746551","url":"https:\/\/voomisupply.com\/products\/harvey-tool-12750-square-end-mill-0-05-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}