{"product_id":"harvey-tool-12510-c3-square-end-mill-5-32-inch-4-flute-altin","title":"Harvey Tool 12510-C3 Square End Mill 5\/32 Inch 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 12510-C3 is a solid carbide square end mill designed for precision material removal in demanding machining environments. This single-end tool features a 5\/32-inch (0.1562 inch) cutting diameter, a 1-inch length of cut, and a 3\/16-inch shank diameter with a 3-inch overall length. The 4-flute geometry combined with a 30-degree helix spiral flute configuration promotes efficient chip evacuation and smooth cutting action. An AlTiN coating provides thermal resistance and extended tool life when cutting ferrous and abrasive workpiece materials. Machinists and CNC operators install this tool in milling centers, VMCs, and manual knee mills for slotting, profiling, and finishing operations.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for both conventional and climb milling in steel, stainless steel, cast iron, aluminum and non-ferrous alloys, and CFRP composite materials. The long-flute geometry makes it appropriate for applications requiring deeper axial engagement relative to the tool diameter. Its centercutting capability allows plunge entry without a pre-drilled hole. Right-hand cut and right-hand flute orientation is standard for conventional spindle rotation. This tool is well matched to small-feature work, tight-tolerance slots, and miniature component machining where a 5\/32-inch cutting diameter is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for elevated thermal protection and extended tool life in steel and stainless applications\u003c\/li\u003e\n  \u003cli\u003e4-flute, 30-degree helix spiral geometry balances cutting load and chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge entry without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eLong-flute series provides 1-inch length of cut in a compact 5\/32-inch diameter\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute for standard CNC and manual milling spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in steel, stainless steel, cast iron, aluminum and non-ferrous metals, and CFRP materials as specified by the manufacturer. Fits any milling machine or CNC machining center with a 3\/16-inch collet, end mill holder, or compatible tool holder accepting a 0.1875-inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is installed by a machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before loading or changing tooling. Secure the 3\/16-inch shank fully and evenly in a properly sized collet or end mill holder to minimize runout. Verify feed rate, depth of cut, and spindle speed against established speeds-and-feeds data for the specific workpiece material before commencing a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/32 inch (0.1562 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Miniature End Mills - Square - Long Flute\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12510-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51730131943730,"sku":"12510-C3","price":68.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4e8812d2b2470bfaa489e415e80bcb36_a433ef00-19bc-4d48-9bb2-4a8c0fda08ad.jpg?v=1788712280","url":"https:\/\/voomisupply.com\/products\/harvey-tool-12510-c3-square-end-mill-5-32-inch-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}