{"product_id":"harvey-tool-11420-c3-spotting-drill-90-deg-solid-carbide","title":"Harvey Tool 11420-C3 Spotting Drill 90 Deg Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 11420-C3 is a solid carbide spotting drill designed to create accurate center-point locations before full drilling operations. Built to a 90-degree point angle, it establishes precise seating geometry that reduces drill walk and improves hole-position accuracy on hard and soft metals alike. The AlTiN coating provides heat resistance and extended tool life under high-speed cutting conditions. With a 0.020-inch cutting diameter and a 1.5-inch overall length, this drill is suited for tight-tolerance work in machining centers and manual mills. Licensed machinists and CNC operators install and deploy this tool in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis spotting drill is intended for general-purpose spotting and center-marking applications across a range of workpiece materials. Its compact cutting diameter of 0.020 inches makes it well suited for small-format work where precise drill entry is critical. The 2-flute spiral design and straight cylindrical shank measuring 0.125 inches in diameter allow it to seat cleanly in standard collet and chuck toolholding systems. Right-hand cutting direction is compatible with conventional spindle rotation on standard vertical and horizontal machining setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e90-degree point angle for accurate drill-start geometry and reduced walk\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding materials\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003e2-flute spiral design promotes chip evacuation during spotting operations\u003c\/li\u003e\n\u003cli\u003eHarvey Type I point geometry for consistent, repeatable center location\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank compatible with standard collets and drill chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose spotting drill for use in standard collet systems and drill chucks that accept a 0.125-inch straight cylindrical shank. Suitable for vertical machining centers, CNC mills, and manual mills running conventional right-hand spindle rotation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or CNC operator using a compatible collet or drill chuck toolholder rated for the shank diameter. Power down and lock out the machine spindle before loading or changing tooling. Verify runout after seating the shank and confirm the tool is secured to the toolholder manufacturers specified torque before initiating a cycle. Inspect the cutting edges and AlTiN coating for chips or wear before each use, as carbide tools are brittle and can fracture if used in a damaged state.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0200 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.0600 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Harvey Type I\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thickness\u003c\/strong\u003e: 0.0020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Spotting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11420-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51731028377906,"sku":"11420-C3","price":70.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1d9baac008b2792f440eb9aa7a82f9fd_025901d3-9b4c-42d2-a66d-c5f3dc5d9abb.jpg?v=1788726071","url":"https:\/\/voomisupply.com\/products\/harvey-tool-11420-c3-spotting-drill-90-deg-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}