{"product_id":"ham-let-3001705-compression-tube-union-1-8-in-316-ss","title":"Ham-let 3001705 Compression Tube Union 1\/8 in 316 Ss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HAM-LET 3001705 is a three-way compression tube union designed for joining tubing runs at a single connection point without welding or threading. Built from 316 stainless steel to ASTM A182, A213, A269, A276, and A479 standards, this union delivers corrosion resistance suited for demanding fluid and gas handling applications. It accepts 1\/8-inch outside-diameter tubing on all three ports and measures 1.76 inches in overall length. Licensed HVAC technicians, instrumentation technicians, and industrial plumbers install this fitting in systems where a leak-tight, reusable connection is required across a wide service temperature range.\u003c\/p\u003e\n\u003cp\u003eThis compression union is used in residential and commercial instrumentation lines, process tubing, pneumatic control circuits, and small-bore fluid distribution systems. Its all-compression end connections allow installation and removal without special tooling beyond a standard wrench, making it practical for tight spaces or field retrofit work. The 316 stainless steel construction makes it appropriate for mildly corrosive media, high-purity fluid service, and outdoor or wet environments where carbon steel fittings would be unsuitable.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eThree compression ports accept 1\/8-inch OD tubing for a tool-minimized, weld-free connection\u003c\/li\u003e\n  \u003cli\u003e316 stainless steel construction with material traceability to ASTM A182, A213, A269, A276, and A479\u003c\/li\u003e\n  \u003cli\u003eRated for service from -20 degrees F to 37 degrees C (98.6 degrees F), covering a broad ambient and process range\u003c\/li\u003e\n  \u003cli\u003eCompact 1.76-inch overall length suits confined instrument panel and tubing rack installations\u003c\/li\u003e\n  \u003cli\u003eDIN EN10122-5 and DIN EN10272 compliance supports international specification requirements\u003c\/li\u003e\n  \u003cli\u003eReusable compression design allows disassembly and re-make without replacing the union body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style compression tube union for 1\/8-inch OD tubing systems. The Swagelok equivalent reference part number is SS-200-3, indicating direct dimensional and functional interchangeability with fittings of that specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified technician familiar with compression fitting assembly procedures. Isolate and depressurize the tubing system completely before disassembly or fitting installation. Follow the fitting manufacturer's recommended number of turns past finger-tight when making up compression connections, and do not over-tighten, as this can deform the ferrule and compromise the seal. Verify applicable codes such as ASME B31.1 or B31.3 for process piping installations before placing the fitting into service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: 316 Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connections\u003c\/strong\u003e: Compression x Compression x Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.76 inches (44.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -20 degrees F (-29 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 37 degrees C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM A182, ASTM A213, ASTM A269, ASTM A276, ASTM A479, DIN EN10122-5, DIN EN10272\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HAM-LET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3001705\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAM-LET","offers":[{"title":"Default Title","offer_id":67910002508082,"sku":"3001705","price":101.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/767133a509df9213aecb875552266d34.jpg?v=1791194678","url":"https:\/\/voomisupply.com\/products\/ham-let-3001705-compression-tube-union-1-8-in-316-ss","provider":"Voomi Supply","version":"1.0","type":"link"}