{"product_id":"gws-314900-square-end-mill-0-5-in-3-flute-solid-carbide","title":"Gws 314900 Square End Mill 0.5 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GWS 314900 is a solid carbide square end mill designed for high-performance milling in ferrous and non-ferrous materials. With a 0.5 inch mill diameter, 4 inch length of cut, and a ZrN (zirconium nitride) coating, this tool delivers extended tool life and reduced friction in demanding machining applications. The 37-degree helix angle promotes efficient chip evacuation and smooth cutting action. It is a single-end, right-hand cutting tool built for use in CNC machining centers and manual mills where precision and durability are required.\u003c\/p\u003e\u003cp\u003eThe 314900 is suited for slotting, profiling, and peripheral milling operations in shop and production environments. It is a centercutting design, allowing plunge entry where needed. The ZrN coating adds wear resistance and is well matched to applications in hardened steels, stainless, and high-temp alloys. Machinists, tool and die makers, and CNC operators working in job shops or manufacturing facilities are the primary users of this tool.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.5 inch mill diameter with 0.5 inch shank diameter for consistent tool holding\u003c\/li\u003e\n\u003cli\u003e4 inch length of cut supports deep cavity and extended-reach milling\u003c\/li\u003e\n\u003cli\u003e3-flute geometry balances chip clearance and cutting edge strength\u003c\/li\u003e\n\u003cli\u003eZrN coating provides wear resistance and reduces built-up edge\u003c\/li\u003e\n\u003cli\u003e37-degree right-hand helix promotes upcut chip evacuation\u003c\/li\u003e\n\u003cli\u003eSubmicron carbide grade for toughness and edge retention\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or upgrade end mill for standard 0.5 inch collet and end mill holder setups in CNC machining centers and manual milling machines. Part of the GWS Series 2030 product line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Ensure the spindle is fully stopped and locked out before changing tooling. Seat the shank fully into the collet or end mill holder and tighten to the tool holder manufacturer specifications. Verify runout with a dial indicator before beginning cuts, as excessive runout will accelerate tool wear and reduce surface finish quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle\/Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 314900\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":52105627304242,"sku":"314900","price":455.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e3e5f660cf19e8f2b626180c6fb8eea_4a4ca741-d093-479a-8bc6-a873e108653f.jpg?v=1790072828","url":"https:\/\/voomisupply.com\/products\/gws-314900-square-end-mill-0-5-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}