{"product_id":"gws-314624-square-end-mill-1-4-in-3-flute-solid-carbide-zrn","title":"Gws 314624 Square End Mill 1\/4 in 3 Flute Solid Carbide Zrn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GWS 314624 is a single-end square end mill designed for precision milling in aluminum and non-ferrous materials. Built from submicron-grade solid carbide, it offers rigidity and wear resistance needed for production and maintenance machining environments. The tool features a ZrN (zirconium nitride) coating, a 37-degree helix angle, and three right-hand spiral flutes. These characteristics combine to promote efficient chip evacuation and reduce built-up edge when cutting aluminum alloys and similar soft metals. With a 0.25 inch cutting diameter and 2 inch length of cut, the 314624 suits deep-pocket milling, slotting, and profiling operations on CNC machining centers and manual mills. Machinists and toolroom technicians are the primary installers of this consumable tooling.\u003c\/p\u003e\u003cp\u003eThis end mill is sized for light- to medium-duty cutting applications in aluminum, brass, copper, and other non-ferrous workpiece materials. Its 4 inch overall length and 0.25 inch shank diameter make it compatible with standard ER or straight-bore collet systems commonly found on vertical machining centers, CNC routers, and knee mills. The Series 2030 designation places it within GWS tooling lines aimed at non-ferrous and general-purpose applications. It is center-cutting, allowing direct plunge entry into the workpiece without a pilot hole. Coolant-through capability is not included on this tool.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSubmicron solid carbide construction for extended tool life in non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eZrN coating reduces friction and resists built-up edge when cutting aluminum\u003c\/li\u003e\n\u003cli\u003e37-degree right-hand helix promotes aggressive chip evacuation in deep cuts\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge milling without pre-drilling\u003c\/li\u003e\n\u003cli\u003eThree flutes balance chip clearance and surface finish in soft-metal applications\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 2 inch length of cut for deep-pocket and slotting work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in aluminum and non-ferrous workpiece materials (Material Code N). Fits standard 1\/4 inch collets and straight-bore tool holders on CNC machining centers, CNC routers, and manual knee mills. Part of the GWS Series 2030 tooling line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and torque the collet nut according to the tool holder manufacturer specifications before machining. Verify spindle runout does not exceed the tolerance required for the intended operation, as excessive runout accelerates carbide tool wear. Always confirm the machine spindle is fully stopped and locked out before changing or inspecting tooling. Cutting parameters including feed rate and depth of cut should be set according to GWS published speeds and feeds for the 314624 in the target workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter-Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 314624\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":51969028030770,"sku":"314624","price":134.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e3e5f660cf19e8f2b626180c6fb8eea_90fae93a-b889-4291-a8c9-fd9f96f6bff3.jpg?v=1789951998","url":"https:\/\/voomisupply.com\/products\/gws-314624-square-end-mill-1-4-in-3-flute-solid-carbide-zrn","provider":"Voomi Supply","version":"1.0","type":"link"}