{"product_id":"gws-311654-corner-radius-end-mill-0-5in-5-flute-carbide","title":"Gws 311654 Corner Radius End Mill 0.5in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GWS 311654 is a solid carbide corner radius end mill designed for high-performance material removal in demanding machining applications. Built to a 0.5-inch diameter with a 0.02-inch corner radius, it delivers the edge protection needed to reduce chipping and extend tool life when cutting ferrous and exotic materials. The 5-flute geometry paired with a variable helix and variable index design minimizes harmonic vibration, improving surface finish and process stability. With a submicron carbide grade and FX3 coating, this tool handles both roughing and finishing operations in a single setup. It is intended for use by machinists and CNC operators working in job shop, aerospace, and general manufacturing environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for cutting steel, stainless steel, superalloys, titanium, and cast iron. The long-reach geometry, with a 1.625-inch length of cut and 4-inch overall length, makes it well-suited for deep-pocket milling, side-wall finishing, and profiling operations where reach beyond standard tooling is required. The single-end, center-cutting configuration allows plunge entry and full peripheral engagement. It mounts in standard end mill holders using a straight cylindrical shank ground to h6 tolerance for consistent runout in collet and hydraulic chuck setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid submicron carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eVariable helix and variable index geometry reduces chatter and vibration during cut\u003c\/li\u003e\n  \u003cli\u003eFX3 coating provides thermal resistance and lubricity for steel, stainless, superalloys, and titanium\u003c\/li\u003e\n  \u003cli\u003e0.02-inch corner radius protects cutting edges and improves surface finish on floor radii\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design permits direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand flute direction and right-hand cutting for standard CNC spindle operation\u003c\/li\u003e\n  \u003cli\u003eh6 shank tolerance ensures precise fit in end mill holders, collets, and hydraulic chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard end mill holders accepting a 0.5-inch straight-cylindrical shank. Primary workpiece materials are steel, stainless steel, superalloys, and titanium; secondary workpiece material is cast iron.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before tool changes. Seat the shank fully into the holder to the recommended gauge length and torque the clamping mechanism per the holder manufacturer's specification. Confirm runout at the tool tip before beginning a production run, as submicron carbide tooling is sensitive to excessive runout, which accelerates edge wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.02 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches (41.27 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches (101.60 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: FX3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Superalloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2205\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 311654\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":51972189847858,"sku":"311654","price":188.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5f2ae90ccdba7fda5776e41759339db7_2f1ca9ee-61b5-4a98-8fc3-6f32abc941d4.jpg?v=1789964012","url":"https:\/\/voomisupply.com\/products\/gws-311654-corner-radius-end-mill-0-5in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}