{"product_id":"gws-310600-square-end-mill-1-in-4-flute-solid-carbide","title":"Gws 310600 Square End Mill 1 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GWS 310600 is a solid carbide square end mill engineered for high-performance milling across a broad range of workpiece materials. Designed for single-end use in CNC machining centers and manual mills, it features a 1 inch cutting diameter, a 4-1\/4 inch length of cut, and four right-hand flutes with a 38-degree helix angle. The tool is finished with an AlCrO-MAX coating, which improves heat resistance and tool life in demanding cutting environments. Machined from submicron carbide grade material, this end mill delivers consistent geometry and edge integrity across extended production runs. It is suited for use by machinists and tooling professionals in metalworking shops and manufacturing facilities.\u003c\/p\u003e\u003cp\u003eThe GWS 310600 is designed for milling operations on a variety of workpiece material types, including cast iron, non-ferrous metals, stainless steels, general steels, heat-resistant superalloys, and hardened materials, as indicated by primary material codes H, K, M, N, P, and S. The 4-1\/4 inch length of cut supports deep-pocket and side-wall milling applications where extended reach is a common requirement. With a 7 inch overall length and a 1 inch square shank with h6 tolerance, it is compatible with standard collet and end mill holders used in production CNC environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 inch cutting diameter with a 4-1\/4 inch length of cut for deep-reach applications\u003c\/li\u003e\n\u003cli\u003eFour right-hand, upcut flutes with a 38-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eAlCrO-MAX coating for improved thermal resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003eSubmicron solid carbide construction for rigidity and edge retention\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003eSquare shank with h6 tolerance for precise fit in standard end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard CNC machining centers and manual milling machines accepting a 1 inch shank diameter end mill holder or collet. Suitable for primary workpiece material codes H, K, M, N, P, and S as specified by the manufacturer.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and all energy is locked out before mounting or removing the tool. Secure the shank fully within the holder to the recommended minimum engagement depth per the toolholder manufacturer specifications. Verify tool runout with a dial indicator before commencing cutting operations to avoid premature edge wear.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlCrO-MAX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 310600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":52015458418994,"sku":"310600","price":899.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2d0cac41a8e96fc89cc22ba1d973a036_d2db6872-cbfb-4035-a022-3697a4fe65cb.jpg?v=1790007815","url":"https:\/\/voomisupply.com\/products\/gws-310600-square-end-mill-1-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}