{"product_id":"gws-125629-square-end-mill-5-8-in-3-flute-solid-carbide","title":"Gws 125629 Square End Mill 5\/8 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GWS 125629 is a solid carbide square end mill designed for precision milling operations in metalworking and machining environments. Built from submicron-grade carbide, it delivers hardness and wear resistance suitable for demanding cutting applications. The 5\/8 inch cutting diameter pairs with a 2-1\/2 inch length of cut, giving machinists substantial reach for slotting, profiling, and peripheral milling. A 37-degree helix angle promotes efficient chip evacuation and smooth cutting action. With a bright, uncoated finish, this end mill is well suited for general-purpose milling where coating is not required. It is a single-end tool with a 5\/8 inch square shank and is sold individually.\u003c\/p\u003e\u003cp\u003eThe GWS 125629 is used in CNC machining centers and manual milling machines for a range of general-purpose material removal tasks. Its 3-flute, right-hand cutting geometry with an upcut flute direction makes it a practical choice for slotting and profiling in ferrous and non-ferrous materials. The standard-length configuration and square shank type allow straightforward setup in most collet or end mill holder systems. Machinists in job shops, production facilities, and tool rooms will find this end mill applicable to everyday milling work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5\/8 inch cutting diameter with 2-1\/2 inch length of cut for extended reach in deep slots and profiles\u003c\/li\u003e\n\u003cli\u003eSubmicron-grade solid carbide construction for hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003e3-flute, right-hand upcut geometry promotes efficient chip removal\u003c\/li\u003e\n\u003cli\u003e37-degree helix angle supports smooth cutting action and reduced chatter\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish for general-purpose milling applications\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 5\/8 inch square shank for standard toolholder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose solid carbide square end mill compatible with standard collet chucks and end mill holders accepting a 5\/8 inch square shank in CNC and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's guidelines. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Verify the shank is clean and fully seated in the collet or holder to the recommended engagement depth before tightening. Inspect the cutting edges for chips or damage before use and replace the tool if wear affects cut quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-1\/2 inches (2.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide, Submicron Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 125629\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":52100438360370,"sku":"125629","price":355.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e4a1d62b86cafd2638635a27d04f49a7_88dd4d1c-6c1d-4c09-a057-83bd75035550.jpg?v=1790069001","url":"https:\/\/voomisupply.com\/products\/gws-125629-square-end-mill-5-8-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}