{"product_id":"gws-122823-corner-radius-end-mill-1-2-in-7-flute-carbide","title":"Gws 122823 Corner Radius End Mill 1\/2 in 7 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GWS 122823 is a solid carbide corner radius end mill designed for high-performance finishing operations in demanding metalworking applications. Built to Series 1040 standards, it features a 1\/2 inch cutting diameter, 1 inch length of cut, and a 0.02 inch corner radius that reduces stress concentrations and extends tool life at the cutting edge. With 7 flutes and a variable helix, variable index geometry, this end mill promotes smooth chip evacuation and reduced chatter during finishing passes. It is center-cutting capable, allowing plunge entry, and runs in a right-hand cutting direction with a right-hand flute spiral. Licensed machinists and CNC operators in production and job shop environments install and run this tool.\u003c\/p\u003e\n\u003cp\u003eThe GWS 122823 is suited for finishing passes on steel, stainless steel, cast iron, superalloys, titanium, and hard materials. Its submicron carbide grade and close-pitch flute configuration make it particularly effective in tight-tolerance finishing where surface finish quality is critical. The straight cylindrical shank with h6 tolerance fits standard end mill holders. It is well-matched for use in CNC machining centers handling ferrous and exotic alloy workpieces where a short-length, rigid setup is preferred.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7-flute variable helix and variable index geometry reduces harmonic chatter during finishing cuts\u003c\/li\u003e\n  \u003cli\u003e0.02 inch corner radius protects the cutting edge and improves surface finish at part radii\u003c\/li\u003e\n  \u003cli\u003eSolid submicron carbide construction provides rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank with h6 tolerance ensures consistent, repeatable runout in end mill holders\u003c\/li\u003e\n  \u003cli\u003eShort length of cut configuration maximizes rigidity and minimizes deflection in finishing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard end mill holders. Primary workpiece materials include steel, cast iron, superalloys, and titanium; secondary material is stainless steel. Consult GWS Series 1040 tooling documentation for recommended speeds, feeds, and holder specifications for each material group.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is installed and operated by machinists or CNC programmers on milling machines or machining centers. Before installing or changing the end mill, power down the spindle and confirm the machine is in a safe, locked-out state per your facility lockout\/tagout procedure. Seat the shank fully in the end mill holder and torque the clamping mechanism according to the holder manufacturer's specifications. Confirm runout with a dial indicator before beginning a finishing cut, as excessive runout will degrade surface finish and reduce tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches \/ 12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch (25.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.02 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches (76.20 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches \/ 12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated (FX1 finish)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Close\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel; Cast Iron; Superalloys and Titanium; Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1040\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 122823\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":51972206002482,"sku":"122823","price":224.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/42fa64a5556424c949d12bea0c4ac40a_ee52abf6-9586-45c2-ad4a-a7ba3e630753.jpg?v=1789964453","url":"https:\/\/voomisupply.com\/products\/gws-122823-corner-radius-end-mill-1-2-in-7-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}