{"product_id":"gws-122664-square-end-mill-1-8-in-7-flute-solid-carbide","title":"Gws 122664 Square End Mill 1\/8 in 7 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GWS 122664 is a solid carbide square end mill designed for high-performance milling in demanding cutting applications. Built on the Series 1040 platform, it features a 1\/8 inch diameter with a 1\/4 inch length of cut and a 7-flute configuration with a 38-degree variable helix. The variable helix geometry reduces chatter and harmonics during cutting, improving surface finish and tool life. The nACRo coating provides enhanced heat resistance and lubricity, making this end mill well-suited for dry or semi-dry machining of hardened steels, stainless, and exotic alloys. Submicron carbide grade provides the substrate toughness to back up the coating at elevated cutting speeds.\u003c\/p\u003e\n\u003cp\u003eThis end mill is used in CNC machining centers, vertical mills, and high-speed spindle applications where small-diameter, high-flute-count tooling is required. Its single-end, right-hand cutting and right-hand flute direction make it compatible with conventional CNC setups. The upcut flute geometry evacuates chips upward, keeping the cut zone clear in shallow slotting and side-milling operations. It is a practical choice for tool and die, mold making, aerospace component work, and precision production machining where fine feature detail in hard materials is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7-flute design increases chip load per tooth and improves surface finish in finish-milling passes\u003c\/li\u003e\n  \u003cli\u003e38-degree variable helix reduces resonance and chatter at high RPM\u003c\/li\u003e\n  \u003cli\u003enACRo coating delivers high heat resistance and reduced friction for dry or near-dry cutting\u003c\/li\u003e\n  \u003cli\u003eSubmicron solid carbide substrate provides edge toughness in hardened and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capable, allowing plunge entry in addition to side and slot milling\u003c\/li\u003e\n  \u003cli\u003eUpcut right-hand flute geometry promotes chip evacuation away from the workpiece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining center collets and toolholders accepting a 1\/8 inch straight shank, consistent with Series 1040 solid carbide square end mill specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machining professionals using ER collets, shrink-fit holders, or precision end mill holders sized for a 1\/8 inch shank. Ensure the collet or holder is clean and free of chips before seating the tool, and verify runout with a dial indicator before first use. Do not exceed the holder's rated RPM or axial depth of cut for the diameter in use. Follow machine tool manufacturer guidelines and applicable shop safety procedures when setting cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/4 inch (0.25 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: nACRo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes, 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1040\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 122664\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":52080456466738,"sku":"122664","price":59.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/630dff8c6611a6a8805b808ea59ecdd2_59cb0906-f770-4ea8-9229-3ca06f7145aa.jpg?v=1790055559","url":"https:\/\/voomisupply.com\/products\/gws-122664-square-end-mill-1-8-in-7-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}