{"product_id":"gws-118024-square-end-mill-0-3-in-3-flute-solid-carbide","title":"Gws 118024 Square End Mill 0.3 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GWS 118024 is a three-flute solid carbide square end mill from the Armory series, designed for precision milling operations in metalworking and machining applications. It has a 0.3 inch cutting diameter and a 0.75 inch length of cut, making it well suited for slotting, profiling, and peripheral milling on ferrous and non-ferrous materials. The substrate is submicron-grade carbide, which supports edge sharpness and wear resistance at higher feed rates. The bright\/uncoated finish keeps the tool ready to use out of the box without additional prep. This tool is installed and operated by machinists and CNC programmers in job shop and production environments.\u003c\/p\u003e\n\u003cp\u003eThe GWS 118024 is used in vertical and horizontal milling machines, CNC machining centers, and manual knee mills. Its 37-degree right-hand helix and right-hand cutting direction produce smooth chip evacuation during climb and conventional milling passes. The single-end configuration and 5\/16 inch shank diameter allow it to fit standard collet systems and end mill holders. It is appropriate for light to moderate material removal on aluminum, steel, and similar machinable alloys where a small-diameter, high-precision tool is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSubmicron solid carbide substrate for edge retention and rigidity\u003c\/li\u003e\n  \u003cli\u003eThree flutes with a 37-degree right-hand helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish  -  no post-purchase prep required\u003c\/li\u003e\n  \u003cli\u003eSingle-end design with a 5\/16 inch shank for standard collet compatibility\u003c\/li\u003e\n  \u003cli\u003eGWS Armory series construction for consistent dimensional tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard ER collets, milling chucks, and end mill holders accepting a 5\/16 inch shank diameter on CNC and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC operator. Power down and lock out the spindle before seating or removing the tool from the holder. Ensure the collet bore is clean and free of chips before tightening to the manufacturer specification of the tool holder being used. Verify runout with a dial indicator after installation before beginning a cut  -  excessive runout shortens tool life and reduces surface finish quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches (3\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3125 inches (5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Armory\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 118024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":51996877521202,"sku":"118024","price":132.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/aec9732a320b9d0073d38855aca50fdc.jpg?v=1789993680","url":"https:\/\/voomisupply.com\/products\/gws-118024-square-end-mill-0-3-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}