{"product_id":"gws-101002-square-end-mill-3-8in-3-flute-solid-carbide-zrn","title":"Gws 101002 Square End Mill 3\/8in 3 Flute Solid Carbide Zrn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GWS 101002 is a solid carbide square end mill engineered for high-performance aluminum and non-ferrous metal milling. It features a 3\/8 inch cutting diameter, a 1-1\/2 inch length of cut, and three right-hand flutes with a 37-degree helix angle. The ZrN (zirconium nitride) coating reduces built-up edge and heat transfer, extending tool life in aluminum applications. Manufactured from submicron carbide grade material, it delivers the rigidity and edge retention needed for demanding production environments. This is a single-end, center-cutting tool with right-hand cutting direction and an upcut flute geometry.\u003c\/p\u003e\n\u003cp\u003eThe 101002 belongs to the GWS Series 1025 Alumigator line, which is purpose-built for milling aluminum alloys, soft metals, and similar non-ferrous materials. It is suited for CNC machining centers and manual mills in job shop, aerospace, and general manufacturing environments. The 3\/8 inch shank diameter matches common ER collet and end mill holder sizes, and the 4 inch overall length provides adequate reach for most standard fixturing setups. Machinists and CNC operators working in production shops will find this tool appropriate for slotting, profiling, and pocketing operations in aluminum.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8 inch cutting diameter with 1-1\/2 inch length of cut for precise material removal\u003c\/li\u003e\n  \u003cli\u003e3 right-hand upcut flutes with 37-degree helix angle optimized for aluminum chip evacuation\u003c\/li\u003e\n  \u003cli\u003eZrN coating reduces built-up edge and extends tool life in non-ferrous applications\u003c\/li\u003e\n  \u003cli\u003eSubmicron solid carbide construction for rigidity and edge retention\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows plunge entry as well as peripheral cutting\u003c\/li\u003e\n  \u003cli\u003ePart of the GWS Series 1025 Alumigator line for aluminum-focused applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in the GWS Series 1025 Alumigator line; compatible with standard 3\/8 inch ER collets and end mill holders used on CNC machining centers and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Secure the 3\/8 inch shank firmly in a properly sized collet or end mill holder, torqued to the machine manufacturer's specification. Inspect the cutting edges for chips or damage before each use, and verify runout with a dial indicator when precision is required.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/2 inches (1.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1025 Alumigator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.27 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GWS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 101002\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GWS","offers":[{"title":"Default Title","offer_id":51972904091954,"sku":"101002","price":150.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b629b30e7748d9e340cace532c75622f_2d7faaf1-5a76-4940-8f4a-d2d8b520e3c2.jpg?v=1789971160","url":"https:\/\/voomisupply.com\/products\/gws-101002-square-end-mill-3-8in-3-flute-solid-carbide-zrn","provider":"Voomi Supply","version":"1.0","type":"link"}