{"product_id":"guhring-9037410140000-square-end-mill-0-551-in-3-flute-carbide","title":"Guhring 9037410140000 Square End Mill 0.551 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GUHRING 9037410140000 is a solid carbide square end mill designed for high-performance milling in demanding machining environments. Built on the Series 3741 platform, it features a 0.551-inch (14 mm) cutting diameter, a 0.866-inch (22 mm) length of cut, and a 45-degree helix angle that promotes efficient chip evacuation and smooth cutting action. The FIREX multi-layer coating improves heat and wear resistance, extending tool life in abrasive and high-temperature applications. Three spiral flutes and a center-cutting geometry allow this tool to plunge directly into workpiece material. It is intended for use by machinists, toolroom technicians, and CNC operators working in production or job-shop settings.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling cast iron, stainless steel, and steel, including application to secondary workpiece materials in the N and S material groups. The straight-cylindrical shank with a 0.5512-inch (14 mm) diameter fits standard ER and hydraulic collet systems. At 83 mm overall length with a 38 mm reach, it works well in general-purpose slotting, profiling, and peripheral milling operations where a regular-length tool is appropriate. Right-hand cut and right-hand flute orientation are standard for conventional CNC milling setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFIREX coating for improved wear resistance and performance on ferrous and stainless materials\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle for reduced cutting forces and efficient chip removal\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and dimensional stability at higher feeds and speeds\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance h10 and shank diameter tolerance h6 for precise fit in toolholders\u003c\/li\u003e\n\u003cli\u003eNo chipbreaker, variable helix, or coolant-through features — straightforward geometry for general milling use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills accepting a 0.5512-inch straight-cylindrical shank. Primary workpiece materials are cast iron, stainless steel, and steel (ISO material groups K, M, and P); secondary compatibility covers material groups N and S.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool from its holder. Seat the shank to the recommended gauge-line depth in the collet or toolholder and torque the retention mechanism per the toolholder manufacturer specification. Verify runout at the cutting edge with a dial indicator before beginning production cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.551 inches (14 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.866 inches (22 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5512 inches (14 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: FIREX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: h10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3741\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9037410140000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51738059047218,"sku":"9037410140000","price":210.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9dc84dd7ec9007908f8ec0a53f2f20ce.jpg?v=1788795880","url":"https:\/\/voomisupply.com\/products\/guhring-9037410140000-square-end-mill-0-551-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}