{"product_id":"guhring-9030960127000-corner-chamfer-end-mill-1-2-in","title":"Guhring 9030960127000 Corner Chamfer End Mill 1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GUHRING 9030960127000 is a solid carbide corner chamfer end mill engineered for demanding metal removal in steel, cast iron, stainless steel, superalloys, and titanium. It carries a 0.5 inch mill diameter, a 1 inch length of cut, and four flutes with a variable flute type and a 40-degree high helix angle. The FIREX PVD coating  -  a TiAlN\/TiN multilayer  -  provides elevated heat and wear resistance during high-speed roughing and finishing operations. This is a single-end, center-cutting tool with a 45-degree chamfer angle and a 0.01 inch chamfer width, making it suitable for edge preparation as well as full milling cycles. Machinists and toolroom operators working in production or job-shop environments are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for a wide range of milling operations on ferrous and hard materials. Its right-hand cut and right-hand flute direction are standard for conventional CNC machining centers and manual mills. Designated operations include shouldering, slotting, ramp-down entry, helical interpolation, drill milling, plunging, and recessing. The Weldon flat shank provides positive drive and minimizes pull-out risk in high-load cuts. It is appropriate for both roughing and finishing passes without a tool change, reducing setup time in production workflows.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in ferrous and hard-material applications\u003c\/li\u003e\n  \u003cli\u003eFIREX PVD coating (TiAlN\/TiN) for high-temperature resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer angle with 0.01 inch chamfer width for precise edge breaking and chamfering\u003c\/li\u003e\n  \u003cli\u003eVariable index, 4-flute design reduces chatter and supports both roughing and finishing in a single tool\u003c\/li\u003e\n  \u003cli\u003e40-degree high helix angle promotes efficient chip evacuation and smooth cutting action\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capability enables ramp-down, helical interpolation, plunging, and drill-mill operations\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank minimizes pull-out under high radial and axial loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills accepting 1\/2 inch Weldon flat shank toolholders. Primary workpiece materials are steel and cast iron (ISO P and K classifications); secondary materials include stainless steel, superalloys, titanium, and hard materials (ISO M, S, and H classifications). Part of the GUHRING Series 3096.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Secure the Weldon flat shank firmly in a matched Weldon-style toolholder and verify runout before beginning a cut. Power down and lock out the spindle before loading or unloading the tool. Do not exceed the tool manufacturer's recommended speeds and feeds for the workpiece material and coating classification.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.01 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: FIREX (TiAlN\/TiN PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: h10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3096\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9030960127000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51743103090994,"sku":"9030960127000","price":246.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/29818b41e5f0b7db1fb74cc94ea560da.jpg?v=1788842703","url":"https:\/\/voomisupply.com\/products\/guhring-9030960127000-corner-chamfer-end-mill-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}