{"product_id":"guhring-9026010095200-carbide-jobber-drill-bit-3-8-in","title":"Guhring 9026010095200 Carbide Jobber Drill Bit 3\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GUHRING 9026010095200 is a solid carbide jobber-length drill bit designed for precision hole-making in a wide range of materials. Built from submicron-grade carbide with a bright uncoated finish, it features a 130-degree point angle and a parabolic flute geometry that promotes efficient chip evacuation and reduced cutting forces. The 3\/8 inch diameter bit has a 5.0 inch overall length and delivers a maximum drilling depth of 3.146 inches. Its web-thinned, tapered web construction reduces thrust requirements at entry. Machinists, tool-and-die technicians, and CNC operators rely on this bit for consistent, accurate results in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is engineered for use on aluminum and similar non-ferrous and ferrous workpiece materials, covering material codes K, N, and P. It is well suited to vertical machining centers, drill presses, and manual mills where a straight-cylindrical shank and standard point geometry are preferred. The 8xD flute-to-diameter ratio supports moderate-depth holes without packing chips, making it a practical choice for high-cycle production drilling as well as precision prototype work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSubmicron-grade solid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003e130-degree point angle for fast, centered starts with reduced walking\u003c\/li\u003e\n  \u003cli\u003eParabolic flute design promotes rapid chip evacuation in aluminum and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web reduces axial thrust and entry load\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish maintains tight dimensional tolerances without coating buildup\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, straight-cylindrical shank compatible with standard drill chucks and collets\u003c\/li\u003e\n  \u003cli\u003eANSI-compliant Series 2601 construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard jobber-length drill bit with a 3\/8 inch straight-cylindrical shank, compatible with any drill chuck or collet holder accepting that shank diameter. Rated for workpiece material codes K, N, and P, including aluminum and similar materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist or CNC operator. Secure the shank fully in the chuck or collet before operation and verify runout is within acceptable limits for the application. Ensure spindle speed and feed rate are set appropriately for the workpiece material and bit diameter before cutting. This bit does not support coolant-through delivery; apply external coolant or cutting fluid as required by the material and depth.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.0 inches (127 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3.146 inches (79.92 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 35 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum (Material Codes K, N, P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.000 to -0.022 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2601\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9026010095200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51728504521010,"sku":"9026010095200","price":231.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d27ae7826d7b1c2d70d9139d5a9b5622_73b4e627-0bb8-4e2c-a3b5-96cfb69dd4d3.jpg?v=1788692295","url":"https:\/\/voomisupply.com\/products\/guhring-9026010095200-carbide-jobber-drill-bit-3-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}