{"product_id":"guhring-9006580011900-cobalt-jobber-drill-bit-3-64-in","title":"Guhring 9006580011900 Cobalt Jobber Drill Bit 3\/64 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GUHRING 9006580011900 is a cobalt jobber-length drill bit designed for high-performance drilling in ferrous metals and cast iron. It carries a Titanium Nitride (TiN) coating to extend tool life and reduce friction during cutting. The 3\/64 inch (0.0469 inch decimal) diameter bit features a 130-degree split point, web-thinned tip, and parabolic flute geometry that clears chips efficiently and reduces thrust requirements. Overall length is 1-1\/2 inches with a 5\/8 inch flute length. Right-hand cut with a straight-cylindrical shank sized at 3\/64 inch. Manufactured to DIN 338 specification. Intended for use by machinists, maintenance technicians, and metalworking professionals.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling cast iron and steel in production and maintenance environments. The parabolic flute profile supports deeper drilling by improving chip evacuation, particularly relevant in blind-hole applications up to 0.56 inch depth. The TiN coating provides surface hardness and heat resistance, making it appropriate for higher-speed operations where uncoated bits would wear prematurely. Series 658 designates this as a high-performance catalog line within the GUHRING program. Sold individually, with a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt substrate with Titanium Nitride (TiN) coating for extended tool life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003e130-degree drill point angle for reduced thrust and self-centering on entry\u003c\/li\u003e\n  \u003cli\u003eParabolic flute design improves chip evacuation at depth\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web for lower cutting resistance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with straight-cylindrical shank — fits standard drill chucks\u003c\/li\u003e\n  \u003cli\u003eManufactured to DIN 338 specification for consistent dimensional tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drilling cast iron and steel workpieces (primary workpiece material codes K and P per DIN classification). Fits any standard drill chuck or collet accepting a 3\/64 inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or maintenance technicians familiar with metalworking drill press or hand-drill operation. Secure the workpiece before drilling and use appropriate cutting fluid or lubricant when drilling steel to maximize bit life. Do not exceed the recommended maximum drilling depth of 0.56 inch without retracting to clear chips. Inspect the cutting edges for wear before each use, as TiN-coated cobalt bits should be resharpened or replaced when chipping or excessive wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/64 inch (0.0469 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 0.56 inch (14.22 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.014 to 0.000 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 658\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9006580011900\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51753213198642,"sku":"9006580011900","price":262.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/90871de69679e3c7fe329ba418787708.jpg?v=1788933956","url":"https:\/\/voomisupply.com\/products\/guhring-9006580011900-cobalt-jobber-drill-bit-3-64-in","provider":"Voomi Supply","version":"1.0","type":"link"}