{"product_id":"guhring-9005300026000-jobber-drill-bit-0-1024-in-pm","title":"Guhring 9005300026000 Jobber Drill Bit 0.1024 in Pm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GUHRING 9005300026000 is a jobber-length drill bit engineered for high-performance drilling in ferrous materials. Built from PM-ASP-60 powdered metal (high-speed steel powder metallurgy), it carries a FIREX coating that extends tool life in demanding production environments. The bit measures 0.1024 inches in diameter with a 2.25-inch overall length and features a 130-degree split-point geometry for reduced thrust and self-centering entry. A parabolic flute design improves chip evacuation, making it well suited for deeper holes relative to diameter. Licensed machinists, tool-and-die setups, and HVAC fabrication shops reach for this bit when working through cast iron or steel at sustained duty cycles.\u003c\/p\u003e\u003cp\u003eThis drill bit is rated for use on cast iron and steel workpieces, matching primary material codes K and P per DIN classification. The parabolic flute provides a 5xD flute-to-diameter ratio, supporting a maximum drilling depth of 1.028 inches (26.10 mm) without through-coolant. The straight cylindrical shank seats directly in standard drill chucks and collet holders without adapters. It conforms to DIN 338 geometry standards and is sold individually, making it a practical choice for replacing a single worn bit in a set or stocking a specific size for a recurring application.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePM-ASP-60 powdered metal construction for improved wear resistance over standard HSS\u003c\/li\u003e\n\u003cli\u003eFIREX coating reduces friction and extends tool life in steel and cast iron\u003c\/li\u003e\n\u003cli\u003e130-degree cone-relief point with web thinning for lower entry thrust and accurate starts\u003c\/li\u003e\n\u003cli\u003eParabolic flute profile with tapered web configuration aids chip flow in deeper cuts\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, straight cylindrical shank fits standard chucks and collets without modification\u003c\/li\u003e\n\u003cli\u003eConforms to DIN 338 standard geometry for consistent dimensional performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for drilling cast iron and steel workpieces (DIN material codes K and P). Fits any standard drill chuck or collet holder accepting a 0.1024-inch straight cylindrical shank. Conforms to DIN 338 jobber-length specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and remove drill bits only with the machine fully stopped and power locked out. Seat the shank fully in the chuck or collet and confirm runout before engaging the workpiece. Use appropriate cutting fluid or mist for extended runs in steel to maintain coating integrity and edge life. Inspect the cutting edge and web condition before each use; a worn or chipped point should be reground or replaced before continuing production.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1024 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 1.028 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1024 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Cone Relief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdered Metal (PM-ASP-60)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: FIREX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 530\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.014 to 0.000 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9005300026000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51729703207218,"sku":"9005300026000","price":29.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/40d61c604dd229317dfddccb66755eec_9dc9959d-8b23-4b19-a0cf-b41e2f5d5ae0.jpg?v=1788708076","url":"https:\/\/voomisupply.com\/products\/guhring-9005300026000-jobber-drill-bit-0-1024-in-pm","provider":"Voomi Supply","version":"1.0","type":"link"}