{"product_id":"guhring-9005010067500-taper-length-drill-bit-17-64-in-hss","title":"Guhring 9005010067500 Taper Length Drill Bit 17\/64 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GUHRING 9005010067500 is a taper length twist drill bit designed for general-purpose drilling in metalworking applications. Built from high speed steel with a bright\/uncoated finish, it features a parabolic flute geometry and a web-thinned, parallel web configuration that promotes efficient chip evacuation and reduced thrust. The 130-degree split point provides aggressive material entry without center-punching in most setups. The cylindrical shank measures 17\/64 inch in diameter, matching the drill diameter for straightforward chuck compatibility. This bit suits production and maintenance drilling operations performed by machinists, tool-and-die technicians, and general metal fabricators.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is rated for use in aluminum alloy and steel. The taper length body — with a flute length of approximately 4.03 inches and an overall length of 6.125 inches — provides extended reach beyond standard jobber-length bits while maintaining rigidity. The 10xD flute-to-diameter ratio supports deeper hole applications up to a maximum drilling depth of 3.617 inches (91.88 mm). It is well suited to CNC machining centers, drill presses, and manual milling setups where a longer reach is required but a full aircraft-length bit is unnecessary. Series 501 is GUHRING's general-purpose high-performance drill line conforming to DIN 340.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e17\/64 inch (0.2656 inch) diameter with a diameter tolerance of +0.000 to -0.022 mm for consistent hole sizing\u003c\/li\u003e\n  \u003cli\u003eParabolic flute design with web thinning promotes fast chip removal and lower feed force\u003c\/li\u003e\n  \u003cli\u003e130-degree standard point angle for efficient penetration in steel and aluminum alloy\u003c\/li\u003e\n  \u003cli\u003eTaper length body at 6.125 inches overall gives extended reach vs. jobber-length bits\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated high speed steel construction — suitable for re-sharpening in the field\u003c\/li\u003e\n  \u003cli\u003eConforms to DIN 340 specification for dimensional consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in aluminum alloy and steel workpieces. The cylindrical shank is compatible with standard drill chucks and collet systems sized for 17\/64 inch shanks. Conforms to DIN 340 taper length drill standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tooling technicians familiar with drill press, milling machine, or CNC spindle setup. Secure the cylindrical shank fully in the chuck or collet before operation and verify runout with a dial indicator when precision holes are required. Do not exceed the recommended feed and speed parameters for the workpiece material, and ensure adequate chip clearance when drilling to the maximum depth of 3.617 inches. Cutting fluid or coolant is recommended for steel applications even though this bit does not have through-coolant capability.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 17\/64 inch (0.2656 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4-1\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6-1\/8 inches (6.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3.617 inches (91.88 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 17\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 54.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length x Diameter Ratio\u003c\/strong\u003e: 10xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.000 to -0.022 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum Alloy, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\/Specification\u003c\/strong\u003e: DIN 340\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose \/ High Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9005010067500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51732477477170,"sku":"9005010067500","price":66.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c4c4076d0b338e81497f8cd2f54fc0a6.jpg?v=1788743341","url":"https:\/\/voomisupply.com\/products\/guhring-9005010067500-taper-length-drill-bit-17-64-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}