{"product_id":"guhring-9003360047600-taper-length-drill-bit-0-1875-in","title":"Guhring 9003360047600 Taper Length Drill Bit 0.1875 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GUHRING 9003360047600 is a cobalt taper length drill bit designed for high-performance drilling in demanding materials. Built to DIN 340 standards, it features a 0.1875 inch (3\/16 inch) diameter with a 130-degree split point for accurate starts and reduced walking. The parabolic flute geometry improves chip evacuation and allows for deeper cuts with less heat buildup. With an overall length of 5-3\/16 inches and a flute length of 3-7\/16 inches, this bit handles drilling depths up to 3.144 inches. It carries a cylindrical shank with no threading and is suited for use in CNC machining centers, drill presses, and manual setups by machinists and metalworking trades.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is engineered for use in cast iron, hardened materials, stainless steel, and steel. The cobalt construction provides heat resistance that allows it to maintain cutting geometry when drilling tough alloys that would degrade standard HSS tooling. The 10xD flute-to-diameter ratio makes it well suited for taper length applications where extended reach is needed without sacrificing rigidity. It is commonly used in production machining, tool and die work, and heavy fabrication environments where consistent hole quality and tool life are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction for heat resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e130-degree standard point angle reduces thrust and improves centering\u003c\/li\u003e\n  \u003cli\u003eParabolic flute design accelerates chip removal and reduces clogging in deep holes\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned parallel web for lower cutting force and cleaner entry\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish with tight diameter tolerance of +0.000 to -0.018 mm\u003c\/li\u003e\n  \u003cli\u003eConforms to DIN 340 specification for dimensional consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-grade taper length drill bit for use in standard 3\/16 inch cylindrical shank tool holders, drill chucks, and keyless chucks compatible with Series 336 tooling. Suitable for cast iron, hardened materials, stainless steel, and steel per manufacturer material application data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or metalworking professionals. Secure the cylindrical shank firmly in a matched drill chuck to the full recommended engagement depth before operation. Ensure the workpiece is clamped and the spindle speed and feed rate are set appropriately for cobalt tooling in the target material. Inspect the cutting edges for wear before each use and replace the bit if chipping or rounding is visible.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5-3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3-7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3.144 inches (79.86 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 10xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.000 to -0.018 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 340\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 336\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThreaded Shank\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9003360047600\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51750517211442,"sku":"9003360047600","price":59.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/88c0d959cb057282ae4bb1a3b6222fb0_054845b9-bf95-40a8-972b-c1c94f6f30d3.jpg?v=1788916089","url":"https:\/\/voomisupply.com\/products\/guhring-9003360047600-taper-length-drill-bit-0-1875-in","provider":"Voomi Supply","version":"1.0","type":"link"}