{"product_id":"guhring-9002050100000-jobber-drill-10mm-hss-oxide","title":"Guhring 9002050100000 Jobber Drill 10mm Hss Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GUHRING 9002050100000 is a high speed steel jobber-length drill bit ground to DIN 338 specification. It cuts a 10.00 mm diameter hole with a standard 118-degree split-point geometry and a web-thinned, tapered web for reduced thrust at entry. The oxide finish provides mild lubricity and corrosion resistance during use. Overall length is 133.00 mm with an 87.00 mm flute length and a 10.00 mm straight-cylindrical shank. The M2 HSS substrate handles a wide range of ferrous and non-ferrous workpiece materials at conventional cutting speeds. Right-hand spiral flutes evacuate chips efficiently in through-hole and blind-hole applications.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for production and maintenance drilling in metal fabrication shops, mechanical contracting, and industrial maintenance environments. The DIN 338 jobber-length geometry fits standard drill chucks and drill presses as well as hand-held power tools. The 5xD flute-to-diameter ratio provides adequate chip clearance for typical depth-to-diameter ratios encountered in structural steel, mild steel, aluminum, and similar materials. This is a single-piece packaged item with a minimum order quantity of one.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDIN 338 specification, regular spiral, standard point geometry\u003c\/li\u003e\n\u003cli\u003e118-degree point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n\u003cli\u003eM2 high speed steel substrate for broad material compatibility\u003c\/li\u003e\n\u003cli\u003eOxide coating provides mild lubricity and surface protection\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard 3-jaw drill chucks\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting, spiral flute for positive chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit jobber drill for any standard drill chuck accepting a 10.00 mm straight-cylindrical shank, consistent with DIN 338 tooling systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of this drill bit should be performed by qualified machinists or tradespeople familiar with rotary cutting tools. Ensure the drill chuck is fully tightened and the workpiece is securely clamped or fixtured before initiating a cut. Use appropriate cutting fluid or coolant for the workpiece material to extend tool life; this bit does not support through-coolant delivery. Inspect the cutting edge for wear or chipping before each use and remove from service if the point geometry is compromised.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 10.00 mm (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 133.00 mm (5.24 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 87.00 mm (3.43 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10.00 mm (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: M2 High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.000 to -0.022 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.126 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GUHRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9002050100000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GUHRING","offers":[{"title":"Default Title","offer_id":51728416604466,"sku":"9002050100000","price":22.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/83d69f89c46fbc452b6fc7bec513ac36_f47f95e1-aa3c-4f30-b4a5-0ff61ba198b9.jpg?v=1788690966","url":"https:\/\/voomisupply.com\/products\/guhring-9002050100000-jobber-drill-10mm-hss-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}