16 SEER Two-Stage Condensers

• High-efficiency two-stage scroll compressor
• Two-speed PSC condenser fan motor
• ComfortBridge Communications System compatible
• Factory-installed filter drier
• Factory-installed high and low-pressure switches
• High-density foam compressor sound blanket
• Copeland ComfortAlert built in diagnostics
• Fully charged for fifteen feet of tubing length
• Factory-installed sensors monitoring coil and ambient temperature
• Contactor with lug connection
• In communicating mode, only two low voltage wires to the outdoor unit are required
• AHRI Certified - ETL Listed
• Ground lug connection
• Color-coded terminal strip for non-communicating set-up
• Copper tube & enhanced aluminum fin coil
• Customized control algorithms

• The two-stage scroll compressor runs at either 65% or 100% capacity, depending on cooling/heating demand. This operational flexibility provides a great energy-efficient option when compared to a traditional, single-stage unit.
• A two-speed permanent split capacitor (PSC) condenser fan motor is designed to efficiently provide two levels of operation depending on your airflow needs.
• Designed to regulate and communicate with your ComfortBridge Controls System so you can remotely monitor and manage your heating and cooling system at any time, from anywhere with just an internet connection.
• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter's residual system contaminants and moisture.
• A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating. When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.
• High-density foam compressor blanket provides noise reduction when the compressor is in operation.
• Assists contractors in troubleshooting the system with improved diagnostic accuracy by utilizing indicator lights, seven-segment LED display, and fault code storage.
• Fully charged with refrigerant sufficient for 15ft of tubing length to assist with easy installation of unit.
• Consistent and concise monitoring helps to ensure that the system is operating efficiently, regardless of the weather.
• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.
• By simplifying the communication connection to two low voltage wires to the outdoor unit, technicians may eliminate the need to run additional thermostat wiring.
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.
• Contractors can easily and securely connect the ground wire with a screw lug.
• A straight-forward, color-coded terminal strip for non-communicating set-up helps to simplify installation.
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.
• Proprietary, self-contained sequence of actions designed to help control system operation for energy efficient performance and enhanced reliability.

• Heavy-gauge galvanized steel cabinet and louvered coil guards
• Service valves with sweat connections and easy-access gauge ports
• Engineered sound control top design
• Wire fan discharge grille
• Baked-on powder-paint finish with 500-hour salt-spray approval
• Single-panel access to controls with space for field-installed accessories
• Service port and controls are accessible while unit is operating
• Compact footprint
• Rust-resistant screws
• When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

ComfortBridge-Compatible Modulating Variable-Speed ECM Gas Furnace up to 98% AFUE

• Heavy-duty aluminized-steel tubular heat exchanger
• Efficient and quiet variable-speed Blower
• Stainless-steel sloped secondary heat exchanger
• Self-calibrating modulating gas valve
• Integrated communicating ComfortBridge technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
• Silicon Nitride igniter
• Dual 7-segment display
• Color-coded low-voltage terminals
• Modulating gas valve
• All models comply with California 40 ng/J
• AHRI Certified, ETL Listed
• Energy Star
• Furnace control board with self-diagnostics and provisions for electronic air cleaner and 120-volt or 24-volt humidifiers

• High reliability and quality
• Airflow system gently ramps up or down according to heating or cooling demand and provides better comfort
• Faster condensate water drainage and no unit water leakage
• Auto-configure for each installation
• Capable of using non communicating single-stage thermostats
• Durable and long igniter life
• Self-diagnostic control board with constant memory fault code history output
• Provisions for electronic air cleaner and humidifier
• Energy efficient and precise comfort
• Lower NOx emission
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.
• Tax Credit
• Easy Connection for EAC and Humidifier

• Multi-position installation: upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1 pipe)
• Easy to install top venting with optional side vent
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (Qleak) less than or equal to 2%
• Fully insulated heat exchanger and blower section
• Bottom or side return air applications
• Heavy-gage steel cabinet with durable finish

Cased With Internal TXV Upflow/Downflow

• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified
• ETL Listed

• Twenty one inch depth for easier attic access
• Split seam front for easy access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish