{"product_id":"gibraltar-swn10-8-pt-g-threaded-spring-plunger-1-2-13","title":"Gibraltar SWN10-8-PT-G Threaded Spring Plunger 1\/2-13","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR SWN10-8-PT-G is a threaded spring plunger designed to provide controlled, repeatable positioning force in mechanical assemblies and fixtures. The plunger features a 1\/2-13 thread with a 1-1\/4 inch thread length and delivers an initial end force of 6.6 pounds and a final end force of 17.4 pounds. The steel body provides structural rigidity while the nylon nose reduces surface marking and wear on mating components. A built-in locking element secures the plunger body after installation, preventing back-out under vibration. This part is typically installed by machinists, toolmakers, and mechanical assembly technicians working with jigs, fixtures, and positioning components.\u003c\/p\u003e\n\u003cp\u003eThis spring plunger is suited for use in standard tooling and fixture applications where a positive, spring-loaded detent or positioning stop is required. The 1\/4 inch plunger projection provides consistent engagement depth. The 1\/2-13 thread size is a common inch-series thread found in steel tooling plates and fixture blocks across light industrial and manufacturing environments. It is sold individually and is appropriate for both OEM assembly builds and maintenance replacement situations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2-13 thread with 1-1\/4 inch thread length for standard tooling plate installation\u003c\/li\u003e\n  \u003cli\u003e6.6 pound initial end force and 17.4 pound final end force for controlled detent resistance\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch plunger projection for consistent engagement depth\u003c\/li\u003e\n  \u003cli\u003eSteel body construction for durability in industrial fixture applications\u003c\/li\u003e\n  \u003cli\u003eNylon nose reduces marking and wear on contact surfaces\u003c\/li\u003e\n  \u003cli\u003eIntegrated locking element prevents back-out under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard inch-series threaded spring plunger for use in tooling plates, jigs, and mechanical fixtures that accept a 1\/2-13 threaded hole.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by machinists or mechanical technicians using a hex key or spanner wrench suited to the plunger body. Ensure the receiving threaded hole is clean and properly tapped to 1\/2-13 before installation. The locking element should be engaged after the plunger is threaded to the correct depth to prevent loosening during operation. De-energize or lock out any equipment before installing or servicing spring plungers in active assemblies.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Projection\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Plunger Diameter\u003c\/strong\u003e: 0.248 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInitial End Force\u003c\/strong\u003e: 6.6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinal End Force\u003c\/strong\u003e: 17.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocking Element\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Length Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SWN10-8-PT-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51692791234866,"sku":"SWN10-8-PT-G","price":15.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/151e405154049b7ffbef7fddfe892c50.jpg?v=1788302963","url":"https:\/\/voomisupply.com\/products\/gibraltar-swn10-8-pt-g-threaded-spring-plunger-1-2-13","provider":"Voomi Supply","version":"1.0","type":"link"}