{"product_id":"gibraltar-swn10-4-pt-g-threaded-spring-plunger-1-4-20","title":"Gibraltar SWN10-4-PT-G Threaded Spring Plunger 1\/4-20","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR SWN10-4-PT-G is a standard threaded spring plunger designed to provide controlled, spring-loaded positioning and indexing in mechanical assemblies. The steel body houses an internal spring and a nylon nose that delivers a 3\/16-inch projection with an initial end force of 3 pounds and a final end force of 13 pounds. The locking element locks the plunger position once set, preventing unintended back-out under vibration or load. This type of hardware is installed by machinists, tool-and-die makers, and mechanical assembly technicians in fixtures, jigs, and precision mechanisms.\u003c\/p\u003e\n\u003cp\u003eThis spring plunger threads into a tapped 1\/4-20 hole and is suited for light-duty positioning, detent, and alignment applications in industrial equipment, fixtures, and automated assembly tooling. The 1-inch thread length accommodates standard panel and block thicknesses. The nylon nose tip protects mating surfaces from marring, making it appropriate for use against finished or soft workpiece surfaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4-20 thread size with 1-inch thread length for standard tapped-hole installation\u003c\/li\u003e\n  \u003cli\u003e3-pound initial end force and 13-pound final end force for reliable spring-loaded detent action\u003c\/li\u003e\n  \u003cli\u003e3\/16-inch plunger projection provides consistent indexing depth\u003c\/li\u003e\n  \u003cli\u003eSteel body construction for durability in industrial environments\u003c\/li\u003e\n  \u003cli\u003eNylon nose tip protects mating and contact surfaces from damage\u003c\/li\u003e\n  \u003cli\u003eIntegral locking element prevents back-out under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-thread spring plunger for use in any tapped 1\/4-20 hole requiring a spring-loaded detent, positioning, or indexing function in mechanical assemblies and fixtures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by hand or with a hex wrench or screwdriver depending on the drive type; ensure the receiving hole is cleanly tapped to 1\/4-20 before threading in the plunger. Tighten the locking element to secure the plunger at the desired extension without over-torquing the nylon nose or spring assembly. De-energize or lock out any equipment before installing or adjusting spring plungers in automated fixtures or moving assemblies. Inspect the spring and nose for wear during routine maintenance intervals.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4-20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Projection\u003c\/strong\u003e: 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Plunger Diameter\u003c\/strong\u003e: 0.118 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInitial End Force\u003c\/strong\u003e: 3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinal End Force\u003c\/strong\u003e: 13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocking Element\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Length Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SWN10-4-PT-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51690888724786,"sku":"SWN10-4-PT-G","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b7f39b487e35d05a021c00c7f4e9704a_b749c54d-38d0-4b40-b8fc-75260932124c.jpg?v=1788277067","url":"https:\/\/voomisupply.com\/products\/gibraltar-swn10-4-pt-g-threaded-spring-plunger-1-4-20","provider":"Voomi Supply","version":"1.0","type":"link"}