{"product_id":"gibraltar-ssw10-8sl-g-threaded-spring-plunger-1-2-13-ss","title":"Gibraltar SSW10-8SL-G Threaded Spring Plunger 1\/2-13 Ss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR SSW10-8SL-G is a stubby threaded spring plunger designed for indexing, positioning, and light-duty latching applications in mechanical assemblies. The stainless steel body and nose provide corrosion resistance in environments where moisture, cleaning agents, or dissimilar-metal concerns are a factor. The plunger carries a 1\/2-13 thread with a body and thread length of 0.75 inches, a maximum plunger diameter of 0.248 inches, and a projection of 0.151 inches. Initial end force is 1.75 pounds and final end force is 5.5 pounds. Machinists, toolmakers, and mechanical assemblers install this type of component in jigs, fixtures, enclosures, and production tooling.\u003c\/p\u003e\n\u003cp\u003eThe SSW10-8SL-G suits applications requiring a compact, low-profile spring plunger where thread engagement depth is limited. The stubby body length of 0.75 inches makes it appropriate for thin panels, shallow-tapped housings, and space-constrained fixtures. The stainless steel construction suits food processing, washdown, marine, and general industrial environments where carbon steel would corrode. No locking element is present, so the plunger threads directly into a prepared 1\/2-13 tapped hole without requiring thread-locking inserts or secondary retention features.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eStubby body configuration with 0.75 inch body length for space-constrained installations\u003c\/li\u003e\n  \u003cli\u003eStainless steel body and nose for corrosion resistance in washdown and marine environments\u003c\/li\u003e\n  \u003cli\u003e1\/2-13 thread size for direct installation into standard tapped holes\u003c\/li\u003e\n  \u003cli\u003e1.75 pound initial end force and 5.5 pound final end force for controlled indexing loads\u003c\/li\u003e\n  \u003cli\u003e0.151 inch plunger projection provides consistent, repeatable positioning engagement\u003c\/li\u003e\n  \u003cli\u003eNo locking element — simple thread-in installation, no secondary retention required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for installation into any 1\/2-13 tapped hole where a stubby spring plunger is specified. Suitable for use in jigs, fixtures, enclosures, and mechanical assemblies requiring light-load indexing or positioning.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or mechanical assembler using a spanner wrench or appropriate drive tool sized to the plunger body. Ensure the receiving hole is tapped to 1\/2-13 and is clean and free of chips before threading the plunger in. Apply thread sealant only if specified by the assembly drawing, as excess sealant can restrict plunger travel. Do not over-torque — consult the assembly specification for the required seating torque, as no torque value is supplied with this part.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Plunger Diameter\u003c\/strong\u003e: 0.248 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Projection\u003c\/strong\u003e: 0.151 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInitial End Force\u003c\/strong\u003e: 1.75 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinal End Force\u003c\/strong\u003e: 5.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlunger Length Type\u003c\/strong\u003e: Stubby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocking Element\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SSW10-8SL-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51698993856818,"sku":"SSW10-8SL-G","price":15.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cf87f9f10a2fe74695f59826e5c1dd1b.jpg?v=1788370866","url":"https:\/\/voomisupply.com\/products\/gibraltar-ssw10-8sl-g-threaded-spring-plunger-1-2-13-ss","provider":"Voomi Supply","version":"1.0","type":"link"}