{"product_id":"gibraltar-mt7696-g-straight-ejector-pin-5mm-500mm-steel","title":"Gibraltar MT7696-G Straight Ejector Pin 5mm 500mm Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR MT7696-G is a straight ejector pin manufactured from steel with a nitride finish, designed for use in injection mold tooling and die applications. It features a 5 mm pin diameter, a 497 mm pin length, and a 500 mm overall length with a 10 mm head diameter and 3 mm head height. The nitride finish provides improved surface hardness and wear resistance, extending service life in high-cycle mold environments. This pin is installed and replaced by toolmakers, mold technicians, and precision machining professionals during mold maintenance or new tooling builds.\u003c\/p\u003e\n\u003cp\u003eStraight ejector pins like the MT7696-G are used in plastic injection molds, die casting tooling, and stamping dies to push finished parts from the mold cavity after each cycle. This pin is suited for medium-bore ejector pin applications in both production and prototype tooling. It is a direct-fit replacement for worn or broken ejector pins of matching geometry in existing mold bases.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5 mm pin diameter for precise bore fitment in standard ejector pin housings\u003c\/li\u003e\n  \u003cli\u003e500 mm overall length accommodates deep mold bases and extended ejector travel\u003c\/li\u003e\n  \u003cli\u003eNitride surface finish increases hardness and wear resistance for extended cycle life\u003c\/li\u003e\n  \u003cli\u003e10 mm head diameter and 3 mm head height conform to standard ejector plate counterbore dimensions\u003c\/li\u003e\n  \u003cli\u003eSteel construction provides the strength and machinability required for mold tooling service\u003c\/li\u003e\n  \u003cli\u003eSold individually, allowing single-pin replacement without purchasing a full set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement straight ejector pin for injection molds, die casting tooling, and stamping dies requiring a 5 mm diameter straight ejector pin with a 500 mm overall length and standard head geometry.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and replacement of ejector pins should be performed by qualified toolmakers or mold technicians with the mold fully de-energized, hydraulic press pressure relieved, and all moving platens locked out per facility lockout\/tagout procedures. Verify pin bore diameter, ejector plate counterbore depth, and overall mold stack dimensions before installing to confirm fitment. Do not force-fit pins into undersized bores, as this can cause bore damage or pin failure during cycling. Consult the mold design drawings for proper ejector pin placement and retaining methods.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Straight Ejector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: 5 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Length\u003c\/strong\u003e: 497 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 500 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.26 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MT7696-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51700301726002,"sku":"MT7696-G","price":28.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/612d7b5132fc623f4843a31396160e28_e7d9e22c-a477-4d15-9983-e8ba6c977a18.jpg?v=1788388698","url":"https:\/\/voomisupply.com\/products\/gibraltar-mt7696-g-straight-ejector-pin-5mm-500mm-steel","provider":"Voomi Supply","version":"1.0","type":"link"}