{"product_id":"gibraltar-mep1111-g-straight-ejector-pin-14mm-steel","title":"Gibraltar MEP1111-G Straight Ejector Pin 14mm Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR MEP1111-G is a straight ejector pin designed for use in injection mold tooling and die casting applications. It drives molded parts out of cavities at the end of each press cycle. The pin measures 14 mm in diameter with an overall length of 1000 mm, a usable pin length of 993 mm, and a head diameter of 22 mm with a head height of 7 mm. Constructed from steel with a nitride finish, it resists wear and surface fatigue under repeated high-cycle loading. Toolmakers and mold technicians are the primary installers of this component in production tooling environments.\u003c\/p\u003e\n\u003cp\u003eThis ejector pin is suited for plastic injection molds, die casting dies, and stamping tooling where long-travel ejection is required. The 1000 mm overall length accommodates deep mold bases or extended ejector plate assemblies. The nitride surface treatment improves hardness and corrosion resistance, extending service intervals in high-volume production settings. It is used in both OEM mold builds and mold repair or refurbishment work across automotive, industrial, and consumer goods tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e14 mm pin diameter for precise bore fitment in standard ejector pin bushings\u003c\/li\u003e\n  \u003cli\u003e1000 mm overall length supports deep mold base configurations and long ejection strokes\u003c\/li\u003e\n  \u003cli\u003e993 mm usable pin length with a 22 mm head diameter and 7 mm head height for positive ejector plate retention\u003c\/li\u003e\n  \u003cli\u003eSteel construction with nitride finish for improved surface hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStraight ejector pin type for direct, linear part ejection without angular offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a straight ejector pin replacement or new-build component for injection mold tooling and die casting dies requiring a 14 mm pin diameter and 1000 mm overall length.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified toolmakers or moldmakers during mold assembly or maintenance. The mold must be fully de-energized, cooled, and secured in a press or fixture before ejector pin replacement. Pins should be measured and verified against the existing bore diameter and ejector plate pocket dimensions before installation. Avoid forcing pins into undersized bores, as this can cause galling or damage to the pin and mold base.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Straight Ejector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: 14 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Length\u003c\/strong\u003e: 993 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1000 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 22 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 22.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MEP1111-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51723862442290,"sku":"MEP1111-G","price":105.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/233028fc279356a4f434e7b52bcd4188.jpg?v=1788608946","url":"https:\/\/voomisupply.com\/products\/gibraltar-mep1111-g-straight-ejector-pin-14mm-steel","provider":"Voomi Supply","version":"1.0","type":"link"}