{"product_id":"gibraltar-mep1102-g-straight-ejector-pin-12-5-mm-steel","title":"Gibraltar MEP1102-G Straight Ejector Pin 12.5 Mm Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR MEP1102-G is a straight ejector pin used in injection mold tooling to push finished parts out of a mold cavity at the end of each cycle. It features a 12.5 mm pin diameter, a 100 mm overall length, and a nitride finish that improves surface hardness and wear resistance. The pin is machined from steel, giving it the strength needed to withstand the repeated mechanical stress of high-cycle molding operations. It is sized with a 20 mm head diameter and a 7 mm head height, allowing it to seat properly in standard ejector plates. Toolmakers and moldmakers handle installation and maintenance of these components during mold builds and scheduled maintenance shutdowns.\u003c\/p\u003e\n\u003cp\u003eStraight ejector pins like the MEP1102-G are used in plastic injection molds across both production and prototype tooling. They are installed in the ejector plate assembly and actuated by the press ejection system to release molded parts from core and cavity. The 93 mm pin length and 12.5 mm diameter suit it for mid-size mold bases where longer ejector travel or heavier wall sections require a robust pin diameter. This pin ships in a quantity of one, making it suitable for replacement of a single worn or broken pin without purchasing a full set.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e12.5 mm pin diameter for consistent fit in standard ejector plate bushings\u003c\/li\u003e\n  \u003cli\u003e100 mm overall length with 93 mm usable pin length\u003c\/li\u003e\n  \u003cli\u003e20 mm head diameter and 7 mm head height for secure seating in ejector plates\u003c\/li\u003e\n  \u003cli\u003eSteel construction for high mechanical strength under repetitive ejection loads\u003c\/li\u003e\n  \u003cli\u003eNitride finish increases surface hardness and reduces wear over high-cycle use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard straight ejector pin replacement for injection mold tooling that accepts a 12.5 mm diameter pin with a 20 mm head diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or moldmakers during mold maintenance or new mold builds. The press must be fully shut down and all hydraulic or pneumatic pressure relieved before accessing the ejector plate assembly. Pins should be checked for proper fit, alignment, and free movement within their guide bushings before the mold is returned to service. Do not force a pin that binds in its bore, as misalignment can cause pin breakage during operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Straight Ejector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: 12.5 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Length\u003c\/strong\u003e: 93 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 100 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 20 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 7 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MEP1102-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":67636718862642,"sku":"MEP1102-G","price":18.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e40c6b1b8d5fd7e2dc26a04a31393534_d0b5ad2e-ee97-4ea6-aadf-8b3899f67141.jpg?v=1790452121","url":"https:\/\/voomisupply.com\/products\/gibraltar-mep1102-g-straight-ejector-pin-12-5-mm-steel","provider":"Voomi Supply","version":"1.0","type":"link"}