{"product_id":"gibraltar-mep1092-g-straight-ejector-pin-11mm-250mm-steel","title":"Gibraltar MEP1092-G Straight Ejector Pin 11mm 250mm Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR MEP1092-G is a straight ejector pin used in injection mold tooling to push finished parts out of a mold cavity at the end of each cycle. The pin measures 11 mm (0.433 inches) in diameter with an overall length of 250 mm (9.84 inches), a head diameter of 16 mm (0.630 inches), and a head height of 5 mm (0.197 inches). It is manufactured from steel with a nitride finish, which increases surface hardness and wear resistance for extended service in high-cycle mold applications. This component is installed by moldmakers, toolroom machinists, and mold maintenance technicians working on plastic injection molds.\u003c\/p\u003e\n\u003cp\u003eThis ejector pin is suited for use in injection mold bases and tooling where a straight ejector pin with an 11 mm shank diameter and 245 mm pin length is specified. Typical applications include production injection molds in both prototype and production environments. The nitride finish makes this pin appropriate for molds running abrasive or glass-filled resins where wear on ejector components is accelerated. Toolroom personnel will find this pin dimensioned to standard mold component specifications for straightforward drop-in replacement or new mold builds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e11 mm pin diameter for precise fit in standard ejector pin bores\u003c\/li\u003e\n  \u003cli\u003e250 mm overall length with 245 mm usable pin length\u003c\/li\u003e\n  \u003cli\u003e16 mm head diameter and 5 mm head height for positive retention in ejector plates\u003c\/li\u003e\n  \u003cli\u003eSteel construction with nitride finish for improved surface hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStraight ejector pin geometry for direct-push part ejection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard straight ejector pin for injection mold tooling requiring an 11 mm pin diameter and 250 mm overall length. Confirm bore diameter, pin length, head diameter, and head height against the mold drawing before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eEjector pins are installed and replaced by qualified moldmakers or toolroom technicians. Before servicing an injection mold, ensure the mold is fully cooled, the molding machine is locked out and tagged out per facility LOTO procedures, and all hydraulic or pneumatic ejector circuits are depressurized. Check the ejector pin bore for wear or galling before installing a replacement pin, and verify the pin slides freely without binding through the full ejection stroke.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Straight Ejector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: 11 mm (0.433 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Length\u003c\/strong\u003e: 245 mm (9.65 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 250 mm (9.84 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 16 mm (0.630 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 5 mm (0.197 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MEP1092-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51690261152050,"sku":"MEP1092-G","price":28.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c2fb1270eccc5ff03567cddd4d64a401.jpg?v=1788267854","url":"https:\/\/voomisupply.com\/products\/gibraltar-mep1092-g-straight-ejector-pin-11mm-250mm-steel","provider":"Voomi Supply","version":"1.0","type":"link"}