{"product_id":"gibraltar-mep1041-g-straight-ejector-pin-5-5mm-315mm-steel","title":"Gibraltar MEP1041-G Straight Ejector Pin 5.5mm 315mm Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR MEP1041-G is a straight ejector pin used in injection mold tooling to push finished parts out of a mold cavity after each cycle. It features a 5.5 mm pin diameter, a 315 mm overall length, and is manufactured from steel with a nitride finish for hardness and wear resistance. The head measures 10 mm in diameter and 3 mm in height, providing a positive seating surface against the ejector plate. This pin is a standard component installed and maintained by toolmakers and mold technicians in production tooling environments.\u003c\/p\u003e\n\u003cp\u003eStraight ejector pins are used across a wide range of injection molding applications, including thermoplastic and thermoset mold tooling in both production and prototype environments. The 5.5 mm pin diameter and 312 mm pin length make this pin appropriate for deeper mold cavities requiring extended reach. It is suited for use in molds requiring precise, repeatable ejection of molded parts with minimal gate or surface marking.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5.5 mm pin diameter for precise fitment in corresponding mold bore\u003c\/li\u003e\n  \u003cli\u003e315 mm overall length with 312 mm usable pin length for deep-cavity applications\u003c\/li\u003e\n  \u003cli\u003eNitride finish provides surface hardness and corrosion resistance for extended service life\u003c\/li\u003e\n  \u003cli\u003e10 mm head diameter with 3 mm head height for positive retention against ejector plate\u003c\/li\u003e\n  \u003cli\u003eSteel construction withstands repeated ejection cycles under high clamping and ejection loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard straight ejector pin for use in injection mold tooling requiring a 5.5 mm pin diameter and 315 mm overall length with a nitrided steel finish.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified toolmaker or mold technician with the mold fully removed from the press and all hydraulic or mechanical ejection systems fully de-energized and locked out. The pin bore in the ejector plate and mold plate should be checked for diameter tolerance and alignment before installing the replacement pin. Refer to the mold design drawings for correct pin placement and ejector plate travel limits. Do not modify pin length by grinding unless the head-to-pin geometry is verified against the original mold specification.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Straight Ejector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diameter\u003c\/strong\u003e: 5.5 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Length\u003c\/strong\u003e: 312 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 315 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MEP1041-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51693083328818,"sku":"MEP1041-G","price":15.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e40c6b1b8d5fd7e2dc26a04a31393534_f4f60b2e-d616-4be8-a670-73f3ba1c89d3.jpg?v=1788307098","url":"https:\/\/voomisupply.com\/products\/gibraltar-mep1041-g-straight-ejector-pin-5-5mm-315mm-steel","provider":"Voomi Supply","version":"1.0","type":"link"}