{"product_id":"gibraltar-ey6475-g-die-mold-ejector-sleeve-nitride-steel","title":"Gibraltar EY6475-G Die Mold Ejector Sleeve Nitride Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR EY6475-G is a nitride coated die steel ejector sleeve designed for use in die mold tooling applications. It features a 0.375 inch inside diameter and a 0.5 inch outside diameter, with an overall length of 10 inches. The sleeve incorporates a 0.75 inch head diameter and a 0.25 inch head height, along with a 45-degree chamfer angle and a 3\/64 inch chamfer length. A 1\/32 inch corner radius completes the geometry. This component is installed by toolmakers and mold technicians during die set assembly or ejector system maintenance. The nitride coating improves surface hardness and wear resistance for demanding mold cycling conditions.\u003c\/p\u003e\u003cp\u003eThe EY6475-G ejector sleeve is suited for plastic injection mold tooling and die casting ejector systems where a tubular ejector is required to eject parts formed around a core pin. The 0.375 inch bore allows it to ride over a mating core pin while the sleeve travels axially through the mold plate. This sleeve is appropriate for both new mold builds and replacement of worn or damaged ejector sleeves in production tooling. Toolmakers specify this sleeve when standard round ejector pins cannot clear a core feature and a concentric ejector path is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.375 inch inside diameter with 0.5 inch outside diameter for precise fit over mating core pins\u003c\/li\u003e\n\u003cli\u003eNitride coated die steel construction for improved surface hardness and extended service life\u003c\/li\u003e\n\u003cli\u003e10 inch overall length suitable for deeper mold plates and longer ejector travel requirements\u003c\/li\u003e\n\u003cli\u003e0.75 inch head diameter and 0.25 inch head height for positive seating in ejector retainer plates\u003c\/li\u003e\n\u003cli\u003e45-degree chamfer angle with 3\/64 inch chamfer length for guided entry and reduced edge stress\u003c\/li\u003e\n\u003cli\u003e1\/32 inch corner radius at the head transition to reduce stress concentration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-build component for die mold ejector systems requiring a tubular sleeve with a 0.375 inch bore and 0.5 inch outer diameter in standard ejector plate configurations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified toolmakers or mold technicians. The mold press must be locked out and all hydraulic or pneumatic ejector circuits de-energized before removing or installing ejector components. Verify bore and outer diameter clearances against the core pin and mold plate pocket before assembly to ensure proper sliding fit without binding. Consult the mold design drawings for correct ejector plate seating depth and retainer clearance.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Inside Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Length\u003c\/strong\u003e: 0.047 inches (3\/64)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.031 inches (1\/32)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitride Coated Die Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: EY6475-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51690741924146,"sku":"EY6475-G","price":121.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/975addce0577f8571beb5d5824f301aa_c4cc7905-2de2-46fa-90ff-8eb07526bd13.jpg?v=1788274766","url":"https:\/\/voomisupply.com\/products\/gibraltar-ey6475-g-die-mold-ejector-sleeve-nitride-steel","provider":"Voomi Supply","version":"1.0","type":"link"}